So an update here. I am using the Netonix WS-12-250-AC switch running firmware 1.3.3 which is the latest stable version. I tried a 5ghz and 2.4ghz sync AP and tried turning it on with 24V and 48V on both models and cannot get it to work with standard pinouts. This is from the log on the Netonix.
Any ideas? Should I downgrade firmware to before Smart POE became a feature and try it then? I don't see an option in this firmware to disable it. I just want it to work like the guys already have it going ha. Dec 31 19:02:06 UI: Configuration changed by 192.168.1.22 Dec 31 19:02:06 UI: Port 3 PoE: changed from 'Off' to '24V' Dec 31 19:02:08 switch[1352]: PoE enabled on port 3, PoE Smart is starting cable check Dec 31 19:02:13 switch[1352]: Port 3 cable check results: Short, Open, Open, Open Dec 31 19:02:13 switch[1352]: Port 3 failed PoE Smart cable check, disabling PoE Dec 31 19:02:41 UI: Configuration changed by 192.168.1.22 Dec 31 19:02:41 UI: Port 3 PoE: changed from 'Off' to '24V' Dec 31 19:02:43 switch[1352]: PoE enabled on port 3, PoE Smart is starting cable check Dec 31 19:02:48 switch[1352]: Port 3 cable check results: Short, Open, Open, Open Dec 31 19:02:48 switch[1352]: Port 3 failed PoE Smart cable check, disabling PoE Dec 31 19:05:37 UI: Configuration changed by 192.168.1.22 Dec 31 19:05:37 UI: Port 3 PoE: changed from 'Off' to '48V' Dec 31 19:05:39 switch[1352]: PoE enabled on port 3, PoE Smart is starting cable check Dec 31 19:05:44 switch[1352]: Port 3 cable check results: Short, Open, Open, Open Dec 31 19:05:44 switch[1352]: Port 3 failed PoE Smart cable check, disabling PoE Dec 31 19:05:59 UI: Configuration changed by 192.168.1.22 Dec 31 19:05:59 UI: Port 3 PoE: changed from 'Off' to '24VH' Dec 31 19:06:01 switch[1352]: PoE enabled on port 3, PoE Smart is starting cable check Dec 31 19:06:06 switch[1352]: Port 3 cable check results: Short, Open, Open, Open Dec 31 19:06:06 switch[1352]: Port 3 failed PoE Smart cable check, disabling PoE Dec 31 19:07:04 UI: Configuration changed by 192.168.1.22 Dec 31 19:07:04 UI: Port 3 PoE: changed from 'Off' to '24V' Dec 31 19:07:06 switch[1352]: PoE enabled on port 3, PoE Smart is starting cable check Dec 31 19:07:10 switch[1352]: Port 3 cable check results: Short, Open, Open, Open Dec 31 19:07:10 switch[1352]: Port 3 failed PoE Smart cable check, disabling PoE On Wed, Oct 7, 2015 at 12:46 PM, Darin Steffl <[email protected]> wrote: > Hello all, > > We're going to power some ePMP GPS AP's with a Netonix switch. I > understand I can power them with either 24V or 48V but the pinout is > different than standard Ubiquiti passive POE that we're used to. > > Which color wires do we swap on one side of the cable termination to > properly power the ePMP GPS AP's? I found online possibly we swap the blue > and brown pairs but just want to double check here. > > Thanks > > -- > Darin Steffl > Minnesota WiFi > www.mnwifi.com > 507-634-WiFi > <http://www.facebook.com/minnesotawifi> Like us on Facebook > <http://www.facebook.com/minnesotawifi> > -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi <http://www.facebook.com/minnesotawifi> Like us on Facebook <http://www.facebook.com/minnesotawifi>
