See my previous email in this thread: "Ok - so it seems you need to disable the 'PoE Smart' function on the Netonix interface for it to work. This switch is running 1.3.4."
:) On Wed, Oct 7, 2015 at 9:14 PM, Darin Steffl <[email protected]> wrote: > I got it figured out! > > So under Ports tab, there is a very small checkbox labeled "PS" for "POE > Smart" and once I removed the checkbox and went back to 24V, the radio > booted right up at 1G. > > So it does work apparently with PoE Smart turned off. Hope this won't hurt > the radio in some way. > > On Wed, Oct 7, 2015 at 8:06 PM, Darin Steffl <[email protected]> > wrote: > >> So an update here. I am using the Netonix WS-12-250-AC switch running >> firmware 1.3.3 which is the latest stable version. I tried a 5ghz and >> 2.4ghz sync AP and tried turning it on with 24V and 48V on both models and >> cannot get it to work with standard pinouts. This is from the log on the >> Netonix. >> >> Any ideas? Should I downgrade firmware to before Smart POE became a >> feature and try it then? I don't see an option in this firmware to disable >> it. I just want it to work like the guys already have it going ha. >> >> >> Dec 31 19:02:06 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:02:06 UI: Port 3 PoE: changed from 'Off' to '24V' >> Dec 31 19:02:08 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:02:13 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:02:13 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> Dec 31 19:02:41 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:02:41 UI: Port 3 PoE: changed from 'Off' to '24V' >> Dec 31 19:02:43 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:02:48 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:02:48 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> Dec 31 19:05:37 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:05:37 UI: Port 3 PoE: changed from 'Off' to '48V' >> Dec 31 19:05:39 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:05:44 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:05:44 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> Dec 31 19:05:59 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:05:59 UI: Port 3 PoE: changed from 'Off' to '24VH' >> Dec 31 19:06:01 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:06:06 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:06:06 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> Dec 31 19:07:04 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:07:04 UI: Port 3 PoE: changed from 'Off' to '24V' >> Dec 31 19:07:06 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:07:10 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:07:10 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> >> >> >> On Wed, Oct 7, 2015 at 12:46 PM, Darin Steffl <[email protected]> >> wrote: >> >>> Hello all, >>> >>> We're going to power some ePMP GPS AP's with a Netonix switch. I >>> understand I can power them with either 24V or 48V but the pinout is >>> different than standard Ubiquiti passive POE that we're used to. >>> >>> Which color wires do we swap on one side of the cable termination to >>> properly power the ePMP GPS AP's? I found online possibly we swap the blue >>> and brown pairs but just want to double check here. >>> >>> Thanks >>> >>> -- >>> Darin Steffl >>> Minnesota WiFi >>> www.mnwifi.com >>> 507-634-WiFi >>> <http://www.facebook.com/minnesotawifi> Like us on Facebook >>> <http://www.facebook.com/minnesotawifi> >>> >> >> >> >> -- >> Darin Steffl >> Minnesota WiFi >> www.mnwifi.com >> 507-634-WiFi >> <http://www.facebook.com/minnesotawifi> Like us on Facebook >> <http://www.facebook.com/minnesotawifi> >> > > > > -- > Darin Steffl > Minnesota WiFi > www.mnwifi.com > 507-634-WiFi > <http://www.facebook.com/minnesotawifi> Like us on Facebook > <http://www.facebook.com/minnesotawifi> >
