Missed that. There was so many emails right away I'm sure I missed it on my cellphone. Thanks!
On Wed, Oct 7, 2015 at 9:27 PM, Josh Baird <[email protected]> wrote: > See my previous email in this thread: > > "Ok - so it seems you need to disable the 'PoE Smart' function on the > Netonix interface for it to work. This switch is running 1.3.4." > > :) > > On Wed, Oct 7, 2015 at 9:14 PM, Darin Steffl <[email protected]> > wrote: > >> I got it figured out! >> >> So under Ports tab, there is a very small checkbox labeled "PS" for "POE >> Smart" and once I removed the checkbox and went back to 24V, the radio >> booted right up at 1G. >> >> So it does work apparently with PoE Smart turned off. Hope this won't >> hurt the radio in some way. >> >> On Wed, Oct 7, 2015 at 8:06 PM, Darin Steffl <[email protected]> >> wrote: >> >>> So an update here. I am using the Netonix WS-12-250-AC switch running >>> firmware 1.3.3 which is the latest stable version. I tried a 5ghz and >>> 2.4ghz sync AP and tried turning it on with 24V and 48V on both models and >>> cannot get it to work with standard pinouts. This is from the log on the >>> Netonix. >>> >>> Any ideas? Should I downgrade firmware to before Smart POE became a >>> feature and try it then? I don't see an option in this firmware to disable >>> it. I just want it to work like the guys already have it going ha. >>> >>> >>> Dec 31 19:02:06 UI: Configuration changed by 192.168.1.22 >>> Dec 31 19:02:06 UI: Port 3 PoE: changed from 'Off' to '24V' >>> Dec 31 19:02:08 switch[1352]: PoE enabled on port 3, PoE Smart is starting >>> cable check >>> Dec 31 19:02:13 switch[1352]: Port 3 cable check results: Short, Open, >>> Open, Open >>> Dec 31 19:02:13 switch[1352]: Port 3 failed PoE Smart cable check, >>> disabling PoE >>> Dec 31 19:02:41 UI: Configuration changed by 192.168.1.22 >>> Dec 31 19:02:41 UI: Port 3 PoE: changed from 'Off' to '24V' >>> Dec 31 19:02:43 switch[1352]: PoE enabled on port 3, PoE Smart is starting >>> cable check >>> Dec 31 19:02:48 switch[1352]: Port 3 cable check results: Short, Open, >>> Open, Open >>> Dec 31 19:02:48 switch[1352]: Port 3 failed PoE Smart cable check, >>> disabling PoE >>> Dec 31 19:05:37 UI: Configuration changed by 192.168.1.22 >>> Dec 31 19:05:37 UI: Port 3 PoE: changed from 'Off' to '48V' >>> Dec 31 19:05:39 switch[1352]: PoE enabled on port 3, PoE Smart is starting >>> cable check >>> Dec 31 19:05:44 switch[1352]: Port 3 cable check results: Short, Open, >>> Open, Open >>> Dec 31 19:05:44 switch[1352]: Port 3 failed PoE Smart cable check, >>> disabling PoE >>> Dec 31 19:05:59 UI: Configuration changed by 192.168.1.22 >>> Dec 31 19:05:59 UI: Port 3 PoE: changed from 'Off' to '24VH' >>> Dec 31 19:06:01 switch[1352]: PoE enabled on port 3, PoE Smart is starting >>> cable check >>> Dec 31 19:06:06 switch[1352]: Port 3 cable check results: Short, Open, >>> Open, Open >>> Dec 31 19:06:06 switch[1352]: Port 3 failed PoE Smart cable check, >>> disabling PoE >>> Dec 31 19:07:04 UI: Configuration changed by 192.168.1.22 >>> Dec 31 19:07:04 UI: Port 3 PoE: changed from 'Off' to '24V' >>> Dec 31 19:07:06 switch[1352]: PoE enabled on port 3, PoE Smart is starting >>> cable check >>> Dec 31 19:07:10 switch[1352]: Port 3 cable check results: Short, Open, >>> Open, Open >>> Dec 31 19:07:10 switch[1352]: Port 3 failed PoE Smart cable check, >>> disabling PoE >>> >>> >>> >>> On Wed, Oct 7, 2015 at 12:46 PM, Darin Steffl <[email protected]> >>> wrote: >>> >>>> Hello all, >>>> >>>> We're going to power some ePMP GPS AP's with a Netonix switch. I >>>> understand I can power them with either 24V or 48V but the pinout is >>>> different than standard Ubiquiti passive POE that we're used to. >>>> >>>> Which color wires do we swap on one side of the cable termination to >>>> properly power the ePMP GPS AP's? I found online possibly we swap the blue >>>> and brown pairs but just want to double check here. >>>> >>>> Thanks >>>> >>>> -- >>>> Darin Steffl >>>> Minnesota WiFi >>>> www.mnwifi.com >>>> 507-634-WiFi >>>> <http://www.facebook.com/minnesotawifi> Like us on Facebook >>>> <http://www.facebook.com/minnesotawifi> >>>> >>> >>> >>> >>> -- >>> Darin Steffl >>> Minnesota WiFi >>> www.mnwifi.com >>> 507-634-WiFi >>> <http://www.facebook.com/minnesotawifi> Like us on Facebook >>> <http://www.facebook.com/minnesotawifi> >>> >> >> >> >> -- >> Darin Steffl >> Minnesota WiFi >> www.mnwifi.com >> 507-634-WiFi >> <http://www.facebook.com/minnesotawifi> Like us on Facebook >> <http://www.facebook.com/minnesotawifi> >> > > -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi <http://www.facebook.com/minnesotawifi> Like us on Facebook <http://www.facebook.com/minnesotawifi>
