Next question, The voltage range of these AP's is 22V to 56V with the stock poe putting out 30V.
Would you recommend us set the Netonix switch to 24V or 48V? The runs are short at 20 feet so I'm assuming 24V would be perfectly fine unless there is some advantage to going up to 48V output maybe for longer runs. On Wed, Oct 7, 2015 at 8:14 PM, Darin Steffl <[email protected]> wrote: > I got it figured out! > > So under Ports tab, there is a very small checkbox labeled "PS" for "POE > Smart" and once I removed the checkbox and went back to 24V, the radio > booted right up at 1G. > > So it does work apparently with PoE Smart turned off. Hope this won't hurt > the radio in some way. > > On Wed, Oct 7, 2015 at 8:06 PM, Darin Steffl <[email protected]> > wrote: > >> So an update here. I am using the Netonix WS-12-250-AC switch running >> firmware 1.3.3 which is the latest stable version. I tried a 5ghz and >> 2.4ghz sync AP and tried turning it on with 24V and 48V on both models and >> cannot get it to work with standard pinouts. This is from the log on the >> Netonix. >> >> Any ideas? Should I downgrade firmware to before Smart POE became a >> feature and try it then? I don't see an option in this firmware to disable >> it. I just want it to work like the guys already have it going ha. >> >> >> Dec 31 19:02:06 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:02:06 UI: Port 3 PoE: changed from 'Off' to '24V' >> Dec 31 19:02:08 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:02:13 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:02:13 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> Dec 31 19:02:41 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:02:41 UI: Port 3 PoE: changed from 'Off' to '24V' >> Dec 31 19:02:43 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:02:48 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:02:48 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> Dec 31 19:05:37 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:05:37 UI: Port 3 PoE: changed from 'Off' to '48V' >> Dec 31 19:05:39 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:05:44 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:05:44 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> Dec 31 19:05:59 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:05:59 UI: Port 3 PoE: changed from 'Off' to '24VH' >> Dec 31 19:06:01 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:06:06 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:06:06 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> Dec 31 19:07:04 UI: Configuration changed by 192.168.1.22 >> Dec 31 19:07:04 UI: Port 3 PoE: changed from 'Off' to '24V' >> Dec 31 19:07:06 switch[1352]: PoE enabled on port 3, PoE Smart is starting >> cable check >> Dec 31 19:07:10 switch[1352]: Port 3 cable check results: Short, Open, Open, >> Open >> Dec 31 19:07:10 switch[1352]: Port 3 failed PoE Smart cable check, disabling >> PoE >> >> >> >> On Wed, Oct 7, 2015 at 12:46 PM, Darin Steffl <[email protected]> >> wrote: >> >>> Hello all, >>> >>> We're going to power some ePMP GPS AP's with a Netonix switch. I >>> understand I can power them with either 24V or 48V but the pinout is >>> different than standard Ubiquiti passive POE that we're used to. >>> >>> Which color wires do we swap on one side of the cable termination to >>> properly power the ePMP GPS AP's? I found online possibly we swap the blue >>> and brown pairs but just want to double check here. >>> >>> Thanks >>> >>> -- >>> Darin Steffl >>> Minnesota WiFi >>> www.mnwifi.com >>> 507-634-WiFi >>> <http://www.facebook.com/minnesotawifi> Like us on Facebook >>> <http://www.facebook.com/minnesotawifi> >>> >> >> >> >> -- >> Darin Steffl >> Minnesota WiFi >> www.mnwifi.com >> 507-634-WiFi >> <http://www.facebook.com/minnesotawifi> Like us on Facebook >> <http://www.facebook.com/minnesotawifi> >> > > > > -- > Darin Steffl > Minnesota WiFi > www.mnwifi.com > 507-634-WiFi > <http://www.facebook.com/minnesotawifi> Like us on Facebook > <http://www.facebook.com/minnesotawifi> > -- Darin Steffl Minnesota WiFi www.mnwifi.com 507-634-WiFi <http://www.facebook.com/minnesotawifi> Like us on Facebook <http://www.facebook.com/minnesotawifi>
