Ok and I can use existing CMM's to do so? What are the base antenna options? Does anyone make a true (3db) 120 degree dual slant sector? How about a dual slant omni? John Woodfield, President Delmarva WiFi Inc. 410-870-WiFi
-----Original Message----- From: "Sriram Chaturvedi" <[email protected]> Sent: Wednesday, November 25, 2015 2:49pm To: "[email protected]" <[email protected]> Subject: Re: [AFMUG] PMP450i 900MHz Yes they will. 900 MHz PMP 100 uses 5 ms frame so make sure the 900 MHz 450i also runs 5ms frame. From: Af <[email protected]> on behalf of John Woodfield <[email protected]> Sent: Wednesday, November 25, 2015 1:45 PM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz Will they sync with PMP100 900? John Woodfield, President Delmarva WiFi Inc. 410-870-WiFi -----Original Message----- From: "Ryan Ray" <[email protected]> Sent: Tuesday, November 24, 2015 6:01pm To: "[email protected]" <[email protected]> Subject: [AFMUG] PMP450i 900MHz "We've been testing PMP450i 900MHz for almost a month now and we're really impressed with it. I have a 1.5 mile shot through multiple evergreen and deciduous trees, along with heavy interference in an urban environment (pager /scada noise spikes at around -65dBm across every channel). I get about 25mbps down and 2mbps up on speed tests using a 10MHz channel width. Latency/jitter is good enough for VoIP and gaming. I believe distributors will be shipping radios just after thanksgiving." I found this on DSL reports. Anyone else had any experience with this equipment? How's it looking? Is there any word on pricing or ship times yet?
