What I would really like to see is a "compact" out door case that would hold 4 sync injectors and a Mikrotik CRS. In some instances much easier running power up rather then 16 cat-5 runs.
On Wed, Nov 25, 2015 at 2:54 PM, Forrest Christian (List Account) < [email protected]> wrote: > The AP is 48V so you need a CMM which will handle 48V. > > The CMM4 works with a special cable, and the Packetflux 10/100 and Gigabit > SyncInjectors work as well if you power them with 48V (but make sure you > only use 48V radios in them once you do). There is a issue in relation to > a long cable with the SyncInjectors which has been fixed in the currently > shipping Gigabit SyncInjectors, and I believe cambium is looking at a > software fix as well (I haven't heard any status back either way). > > -forrest > > > On Wed, Nov 25, 2015 at 1:21 PM, John Woodfield <[email protected]> > wrote: > >> Ok and I can use existing CMM's to do so? What are the base antenna >> options? Does anyone make a true (3db) 120 degree dual slant sector? How >> about a dual slant omni? >> >> >> >> >> >> >> >> John Woodfield, President >> >> Delmarva WiFi Inc. >> >> 410-870-WiFi >> >> >> >> -----Original Message----- >> From: "Sriram Chaturvedi" <[email protected]> >> Sent: Wednesday, November 25, 2015 2:49pm >> To: "[email protected]" <[email protected]> >> Subject: Re: [AFMUG] PMP450i 900MHz >> >> Yes they will. 900 MHz PMP 100 uses 5 ms frame so make sure the 900 >> MHz 450i also runs 5ms frame. >> >> >> ------------------------------ >> *From:* Af <[email protected]> on behalf of John Woodfield < >> [email protected]> >> *Sent:* Wednesday, November 25, 2015 1:45 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] PMP450i 900MHz >> >> >> Will they sync with PMP100 900? >> >> >> >> >> >> >> >> John Woodfield, President >> >> Delmarva WiFi Inc. >> >> 410-870-WiFi >> >> >> >> -----Original Message----- >> From: "Ryan Ray" <[email protected]> >> Sent: Tuesday, November 24, 2015 6:01pm >> To: "[email protected]" <[email protected]> >> Subject: [AFMUG] PMP450i 900MHz >> >> "We've been testing PMP450i 900MHz for almost a month now and we're >> really impressed with it. I have a 1.5 mile shot through multiple evergreen >> and deciduous trees, along with heavy interference in an urban environment >> (pager /scada noise spikes at around -65dBm across every channel). I get >> about 25mbps down and 2mbps up on speed tests using a 10MHz channel width. >> Latency/jitter is good enough for VoIP and gaming. I believe distributors >> will be shipping radios just after thanksgiving." >> >> I found this on DSL reports. Anyone else had any experience with this >> equipment? How's it looking? Is there any word on pricing or ship times >> yet? >> > > > > -- > *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* > Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 > [email protected] | http://www.packetflux.com > <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux> > <http://twitter.com/@packetflux> > >
