Yes, and the aforementioned sync pulse alignment updates may require you to run the 900 450i in a legacy mode until you can upgrade your FSK 900 sectors to the new load that makes them line up as well.
This information is in the user guide and release notes. From: Af <[email protected]<mailto:[email protected]>> on behalf of Sriram Chaturvedi <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Wednesday, November 25, 2015 at 1:49 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] PMP450i 900MHz Yes they will. 900 MHz PMP 100 uses 5 ms frame so make sure the 900 MHz 450i also runs 5ms frame. ________________________________ From: Af <[email protected]<mailto:[email protected]>> on behalf of John Woodfield <[email protected]<mailto:[email protected]>> Sent: Wednesday, November 25, 2015 1:45 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] PMP450i 900MHz Will they sync with PMP100 900? John Woodfield, President Delmarva WiFi Inc. 410-870-WiFi -----Original Message----- From: "Ryan Ray" <[email protected]<mailto:[email protected]>> Sent: Tuesday, November 24, 2015 6:01pm To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: [AFMUG] PMP450i 900MHz "We've been testing PMP450i 900MHz for almost a month now and we're really impressed with it. I have a 1.5 mile shot through multiple evergreen and deciduous trees, along with heavy interference in an urban environment (pager /scada noise spikes at around -65dBm across every channel). I get about 25mbps down and 2mbps up on speed tests using a 10MHz channel width. Latency/jitter is good enough for VoIP and gaming. I believe distributors will be shipping radios just after thanksgiving." I found this on DSL reports. Anyone else had any experience with this equipment? How's it looking? Is there any word on pricing or ship times yet?
