SyncInjector and RB2011 or rb260gsp at the top. Fiber and DC down the tower.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 25, 2015 at 4:05 PM, Matt <[email protected]> wrote: > What I would really like to see is a "compact" out door case that would > hold 4 sync injectors and a Mikrotik CRS. In some instances much easier > running power up rather then 16 cat-5 runs. > > > On Wed, Nov 25, 2015 at 2:54 PM, Forrest Christian (List Account) < > [email protected]> wrote: > >> The AP is 48V so you need a CMM which will handle 48V. >> >> The CMM4 works with a special cable, and the Packetflux 10/100 and >> Gigabit SyncInjectors work as well if you power them with 48V (but make >> sure you only use 48V radios in them once you do). There is a issue in >> relation to a long cable with the SyncInjectors which has been fixed in the >> currently shipping Gigabit SyncInjectors, and I believe cambium is looking >> at a software fix as well (I haven't heard any status back either way). >> >> -forrest >> >> >> On Wed, Nov 25, 2015 at 1:21 PM, John Woodfield <[email protected]> >> wrote: >> >>> Ok and I can use existing CMM's to do so? What are the base antenna >>> options? Does anyone make a true (3db) 120 degree dual slant sector? How >>> about a dual slant omni? >>> >>> >>> >>> >>> >>> >>> >>> John Woodfield, President >>> >>> Delmarva WiFi Inc. >>> >>> 410-870-WiFi >>> >>> >>> >>> -----Original Message----- >>> From: "Sriram Chaturvedi" <[email protected]> >>> Sent: Wednesday, November 25, 2015 2:49pm >>> To: "[email protected]" <[email protected]> >>> Subject: Re: [AFMUG] PMP450i 900MHz >>> >>> Yes they will. 900 MHz PMP 100 uses 5 ms frame so make sure the 900 >>> MHz 450i also runs 5ms frame. >>> >>> >>> ------------------------------ >>> *From:* Af <[email protected]> on behalf of John Woodfield < >>> [email protected]> >>> *Sent:* Wednesday, November 25, 2015 1:45 PM >>> *To:* [email protected] >>> *Subject:* Re: [AFMUG] PMP450i 900MHz >>> >>> >>> Will they sync with PMP100 900? >>> >>> >>> >>> >>> >>> >>> >>> John Woodfield, President >>> >>> Delmarva WiFi Inc. >>> >>> 410-870-WiFi >>> >>> >>> >>> -----Original Message----- >>> From: "Ryan Ray" <[email protected]> >>> Sent: Tuesday, November 24, 2015 6:01pm >>> To: "[email protected]" <[email protected]> >>> Subject: [AFMUG] PMP450i 900MHz >>> >>> "We've been testing PMP450i 900MHz for almost a month now and we're >>> really impressed with it. I have a 1.5 mile shot through multiple evergreen >>> and deciduous trees, along with heavy interference in an urban environment >>> (pager /scada noise spikes at around -65dBm across every channel). I get >>> about 25mbps down and 2mbps up on speed tests using a 10MHz channel width. >>> Latency/jitter is good enough for VoIP and gaming. I believe distributors >>> will be shipping radios just after thanksgiving." >>> >>> I found this on DSL reports. Anyone else had any experience with this >>> equipment? How's it looking? Is there any word on pricing or ship times >>> yet? >>> >> >> >> >> -- >> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >> [email protected] | http://www.packetflux.com >> <http://www.linkedin.com/in/fwchristian> >> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >> >> >
