We all had the same complaints about the SMA connectors on the top back when Trango brought out their P5010/P5055 backhauls, but I never had one leak. Interesting their replacement product has N connectors on the bottom.
At least the 450i has the connectors separated far enough apart to allow weatherproofing without nanobots to do the job. From: Aaron Schneider Sent: Wednesday, November 25, 2015 9:53 PM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz The SM could survive the fish tank test, but not in the same manner as the AP, you’d have to insert it vertically due to the shroud cover, whereas the AP could be laid in there on its side. We might have to give this one a try next week. :) From: Af <[email protected]> on behalf of Steve D <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Wednesday, November 25, 2015 at 10:34 AM To: af <[email protected]> Subject: Re: [AFMUG] PMP450i 900MHz SM (which doesn't look like it'd survive the fish tank test) with goofy SMA things on the top: AP: -Steve D On Wed, Nov 25, 2015 at 8:12 AM, Chuck McCown <[email protected]> wrote: Is this the same case as the 450 AP? From: Sriram Chaturvedi Sent: Wednesday, November 25, 2015 8:48 AM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz The "i" stands for "Industrial" due to the IP66/67 rating of the 450i product line. Here's something the development team did to showcase that: http://community.cambiumnetworks.com/t5/PMP-450/PMP-450i-SM-in-a-Fish-Tank/m-p/45964#U45964 The 900 MHz 450 SM is a plastic/metal combo case with SMA connectors. I remember someone posting a picture of it here a few weeks ago. The 900 MHz 450i AP is similar to the 5 GHz 450i AP. More details (with pictures and spec sheets) available here: http://www.cambiumnetworks.com/products/access/pmp-450/ Thanks, Sriram ------------------------------------------------------------------------------ From: Af <[email protected]> on behalf of Josh Luthman <[email protected]> Sent: Wednesday, November 25, 2015 9:42 AM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz 450i is next generation. I don't think they thought about the integrated part. It's the cool thing to do - BMW i8, iPhone, iQ, etc. I would assume N connectors but I don't specifically remember. I remember the 450i 900 looking just like the 450i 5700 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 25, 2015 at 10:39 AM, Chuck McCown <[email protected]> wrote: The “i” at the end would lead me to believe they are integrated. Cambium has a bunch of different cases now, hard to keep up. So they are in the old plastic FSK case with two coaxes coming out? N connectors? From: Josh Luthman Sent: Wednesday, November 25, 2015 8:34 AM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz The same case they're always in, Pinky! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 25, 2015 at 10:33 AM, Chuck McCown <[email protected]> wrote: What case are the SMs in? From: Jeff Broadwick - Lists Sent: Wednesday, November 25, 2015 6:28 AM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz The APs are $2316 and the SMs are around $240 each (street price). Sector antennas are about the same price as the other Cambium sectors Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell [email protected] On Nov 24, 2015, at 11:45 PM, Jaime Solorza <[email protected]> wrote: How much are the radios? On Nov 24, 2015 9:40 PM, "Ken Hohhof" <[email protected]> wrote: MSRP is $89. Not difficult to figure out street price. I can get two TY-900s for $280. But spatial diversity! And gold! Actually, I wish there was a 12 inch 10 dBi panel, like a dual pol version of this: https://www.tessco.com/products/displayProductInfo.do?sku=474662 From: Chuck McCown Sent: Tuesday, November 24, 2015 10:13 PM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz When someone discovers the street price of this thing, please let me know. From: Sriram Chaturvedi Sent: Tuesday, November 24, 2015 6:44 PM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz Hi Eric, Yes. We offer an official Cambium dual polarity yagi. More info here: http://www.cambiumnetworks.com/products/accessories/pmp450-900mhz-directional-antenna/ 900 MHz Directional Antenna - cambiumnetworks.com 900 MHz Directional Antenna. Details on the PMP 450i 900 MHz directional antenna. Read more... Thanks, Sriram ---------------------------------------------------------------------- From: Af <[email protected]> on behalf of Eric Kuhnke <[email protected]> Sent: Tuesday, November 24, 2015 7:37 PM To: [email protected] Subject: Re: [AFMUG] PMP450i 900MHz Is there an 'official' Cambium antenna or recommended antenna for dual polarity 900 MHz yagi? Something like the ubnt dual polarity yagi? On Tue, Nov 24, 2015 at 3:15 PM, Mathew Howard <[email protected]> wrote: Pricing has been available for awhile, APs are the same as the other 450, and SMs are a bit cheaper (considering no they're all uncapped). Last I heard they were saying it will ship late November... which should mean any day now. On Tue, Nov 24, 2015 at 5:01 PM, Ryan Ray <[email protected]> wrote: "We've been testing PMP450i 900MHz for almost a month now and we're really impressed with it. I have a 1.5 mile shot through multiple evergreen and deciduous trees, along with heavy interference in an urban environment (pager /scada noise spikes at around -65dBm across every channel). I get about 25mbps down and 2mbps up on speed tests using a 10MHz channel width. Latency/jitter is good enough for VoIP and gaming. I believe distributors will be shipping radios just after thanksgiving." I found this on DSL reports. Anyone else had any experience with this equipment? How's it looking? Is there any word on pricing or ship times yet?
