Yes, separate injectors for both would be needed. I hate the meanwell SD series as it often shuts down when briefly overloaded, such as during power on inrush loads, use the rsd instead. On Dec 3, 2015 10:46 AM, "Sam Lambie" <[email protected]> wrote:
> I assume that I will need a separate SyncInjector for the 450i then as I > have 450's in the mix as well. Would a Meanwell SD 120-48 PSU Work? > > On Thu, Dec 3, 2015 at 10:42 AM, Josh Baird <[email protected]> wrote: > >> The SyncInjector can take up to ~57V (ignore the label). You will need >> to power it with 48V to power the 450i. >> >> There are problems with cable distance on SyncInjectors prior to H1 (I >> beileve). Depending on your cable distance, you may or may not see an >> issue from what I understand. >> >> Josh >> >> On Thu, Dec 3, 2015 at 12:41 PM, Sam Lambie <[email protected]> wrote: >> >>> After looking at some of the earlier posts, I can't really determine if >>> I can use the 450i AP on a gigabit syncinjector. It appears that it want a >>> 48vdc power supply. What is the best way to set this up? Or will it >>> actually accept the 29 vdc power supply on the SyncInjector? >>> >>> Sam >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> >
