I didn't because it varies depending on the exact type of cable, install methods, etc etc etc. On Dec 3, 2015 11:02 AM, "Josh Luthman" <[email protected]> wrote:
> If you have longer cable runs you want rev I. I don't think Forrest > specified the lengths... > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Dec 3, 2015 12:42 PM, "Josh Baird" <[email protected]> wrote: > >> The SyncInjector can take up to ~57V (ignore the label). You will need >> to power it with 48V to power the 450i. >> >> There are problems with cable distance on SyncInjectors prior to H1 (I >> beileve). Depending on your cable distance, you may or may not see an >> issue from what I understand. >> >> Josh >> >> On Thu, Dec 3, 2015 at 12:41 PM, Sam Lambie <[email protected]> wrote: >> >>> After looking at some of the earlier posts, I can't really determine if >>> I can use the 450i AP on a gigabit syncinjector. It appears that it want a >>> 48vdc power supply. What is the best way to set this up? Or will it >>> actually accept the 29 vdc power supply on the SyncInjector? >>> >>> Sam >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> >>
