Very close to the top of the water tower on the remote end.  It bottom of the 
dish is resting on hr tank because the mount wasn't stable enough with all the 
wind here today 45mph.  I'll raise it up and brace the mount tomorrow and see 
what happens.  

Sent from my iPhone

> On Oct 17, 2016, at 18:03, David Kunat <> wrote:
> There are only two polarities on th af-x series.
> The first two are the receive signals at the local device.
> The second two (Rem chain0 and Rem chain 1) are the remote device receive 
> levels (at the far end of the link).
> Is there something in the way? Are you shooting close to the ground or close 
> to tree tops on one end?
> > On Oct 17, 2016, at 2:39 PM, Craig House <> wrote:
> > 
> > So when you have one chain that shows almost 20 dbi weaker than the other 3 
> > how do you tell which end to troubleshoot? I have already tried to point 
> > both ends better but they are 22 miles apart by air. 45 minutes by drive 
> > and I dont want to just keep driving and climbing if someone can tell me 
> > which end has the problem.
> > 
> > Craig
> > <link.PNG>

Reply via email to