Plug into LinkPlanner Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Oct 17, 2016 7:11 PM, "Craig House" <cr...@totalhighspeed.net> wrote: > Very close to the top of the water tower on the remote end. It bottom of > the dish is resting on hr tank because the mount wasn't stable enough with > all the wind here today 45mph. I'll raise it up and brace the mount > tomorrow and see what happens. > > Sent from my iPhone > > > On Oct 17, 2016, at 18:03, David Kunat <m...@davidkunat.com> wrote: > > > > There are only two polarities on th af-x series. > > > > The first two are the receive signals at the local device. > > > > The second two (Rem chain0 and Rem chain 1) are the remote device > receive levels (at the far end of the link). > > > > Is there something in the way? Are you shooting close to the ground or > close to tree tops on one end? > > > > > > > On Oct 17, 2016, at 2:39 PM, Craig House <cr...@totalhighspeed.net> > wrote: > > > > > > So when you have one chain that shows almost 20 dbi weaker than the > other 3 how do you tell which end to troubleshoot? I have already tried to > point both ends better but they are 22 miles apart by air. 45 minutes by > drive and I dont want to just keep driving and climbing if someone can tell > me which end has the problem. > > > > > > Craig > > > <link.PNG> >
