We've used the raised lid enclosures. A normally 8" deep enclosure
becomes 10" deep with the raised lid.
http://www.enclosurehub.com/productcart/pc/viewCategories.asp?idCategory=961
bp
<part15sbs{at}gmail{dot}com>
On 11/7/2016 1:31 PM, Josh Luthman wrote:
Every enclosure I've used is a few inches too shallow for the switch.
I'd like to avoid putting holes in the sides/top/bottom of the fiber
glass to mount a DIN rain. The switch is 8.25" inch deep so I'd need
roughly 8.5" deep or more enclosure.
Any suggestions welcome, I am primarily looking at DIN mounting
everything and putting rack mount as a worst case backup.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
