Unfortunately I didn't get a decent pic of it. On Tue, Nov 8, 2016 at 7:36 AM, Josh Baird <[email protected]> wrote:
> Pics? > > On Tue, Nov 8, 2016 at 8:20 AM, Mathew Howard <[email protected]> > wrote: > >> I just put one in one of those enclosures last week... Seemed fine to me. >> >> On Nov 7, 2016 4:00 PM, "Josh Baird" <[email protected]> wrote: >> >>> Yeah, even 10" won't cut it with this switch once you consider the >>> connections into the switch (and the enclosure's backplane). >>> >>> On Mon, Nov 7, 2016 at 4:58 PM, Bill Prince <[email protected]> wrote: >>> >>>> We've used the raised lid enclosures. A normally 8" deep enclosure >>>> becomes 10" deep with the raised lid. >>>> >>>> http://www.enclosurehub.com/productcart/pc/viewCategories.as >>>> p?idCategory=961 >>>> >>>> bp >>>> <part15sbs{at}gmail{dot}com> >>>> >>>> >>>> On 11/7/2016 1:31 PM, Josh Luthman wrote: >>>> >>>> Every enclosure I've used is a few inches too shallow for the switch. >>>> I'd like to avoid putting holes in the sides/top/bottom of the fiber glass >>>> to mount a DIN rain. The switch is 8.25" inch deep so I'd need roughly >>>> 8.5" deep or more enclosure. >>>> >>>> Any suggestions welcome, I am primarily looking at DIN mounting >>>> everything and putting rack mount as a worst case backup. >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> >>>> >>> >
