anyone ever have a SLA battery explode in a enclosure and ruin everything that was inside?
On Mon, Nov 7, 2016 at 5:00 PM, Josh Baird <[email protected]> wrote: > Yeah, even 10" won't cut it with this switch once you consider the > connections into the switch (and the enclosure's backplane). > > On Mon, Nov 7, 2016 at 4:58 PM, Bill Prince <[email protected]> wrote: > >> We've used the raised lid enclosures. A normally 8" deep enclosure >> becomes 10" deep with the raised lid. >> >> http://www.enclosurehub.com/productcart/pc/viewCategories.as >> p?idCategory=961 >> >> bp >> <part15sbs{at}gmail{dot}com> >> >> >> On 11/7/2016 1:31 PM, Josh Luthman wrote: >> >> Every enclosure I've used is a few inches too shallow for the switch. >> I'd like to avoid putting holes in the sides/top/bottom of the fiber glass >> to mount a DIN rain. The switch is 8.25" inch deep so I'd need roughly >> 8.5" deep or more enclosure. >> >> Any suggestions welcome, I am primarily looking at DIN mounting >> everything and putting rack mount as a worst case backup. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >
