No, but that would suck. On Tue, Nov 8, 2016 at 8:12 AM, Kurt Fankhauser <[email protected]> wrote:
> anyone ever have a SLA battery explode in a enclosure and ruin everything > that was inside? > > On Mon, Nov 7, 2016 at 5:00 PM, Josh Baird <[email protected]> wrote: > >> Yeah, even 10" won't cut it with this switch once you consider the >> connections into the switch (and the enclosure's backplane). >> >> On Mon, Nov 7, 2016 at 4:58 PM, Bill Prince <[email protected]> wrote: >> >>> We've used the raised lid enclosures. A normally 8" deep enclosure >>> becomes 10" deep with the raised lid. >>> >>> http://www.enclosurehub.com/productcart/pc/viewCategories.as >>> p?idCategory=961 >>> >>> bp >>> <part15sbs{at}gmail{dot}com> >>> >>> >>> On 11/7/2016 1:31 PM, Josh Luthman wrote: >>> >>> Every enclosure I've used is a few inches too shallow for the switch. >>> I'd like to avoid putting holes in the sides/top/bottom of the fiber glass >>> to mount a DIN rain. The switch is 8.25" inch deep so I'd need roughly >>> 8.5" deep or more enclosure. >>> >>> Any suggestions welcome, I am primarily looking at DIN mounting >>> everything and putting rack mount as a worst case backup. >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> >> >
