Yeah, even 10" won't cut it with this switch once you consider the connections into the switch (and the enclosure's backplane).
On Mon, Nov 7, 2016 at 4:58 PM, Bill Prince <[email protected]> wrote: > We've used the raised lid enclosures. A normally 8" deep enclosure becomes > 10" deep with the raised lid. > > http://www.enclosurehub.com/productcart/pc/viewCategories. > asp?idCategory=961 > > bp > <part15sbs{at}gmail{dot}com> > > > On 11/7/2016 1:31 PM, Josh Luthman wrote: > > Every enclosure I've used is a few inches too shallow for the switch. I'd > like to avoid putting holes in the sides/top/bottom of the fiber glass to > mount a DIN rain. The switch is 8.25" inch deep so I'd need roughly 8.5" > deep or more enclosure. > > Any suggestions welcome, I am primarily looking at DIN mounting everything > and putting rack mount as a worst case backup. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > >
