I did pull it from the rack and let it float, no change, however, I didn't reboot it while the card was floating.
On Sun, Mar 25, 2018 at 3:15 PM, <[email protected]> wrote: > When this gets sent.... > Sorry you are having difficulty. > > I would pull it from the rack and see if the interruption of the ground > fixes the problem. > > The issue is either noise to/from the ground. > or > Transverse impulses getting clamped. Could be something about the new > timing stuff that I don’t understand. > Forrest is probably better versed in thinking about this than I am. > > Perhaps the server got launched by Elon Musk and the time delay is just > accumulating. > > *From:* Sam Lambie > *Sent:* Sunday, March 25, 2018 6:10 AM > *To:* [email protected] > *Subject:* [AFMUG] mccowntech rack mount surge suppressor with Medusa > > Yo smart folks, > > I put a gige APC HV rack mount surge suppressor inline with a Cambium > Medusa today. It booted up, got in about 20 pings and then the Packetflux > SyncInjector shutdown. Tried putting the Ethernet cable directly in the > SyncInjector and it worked, just like on the bench when I tested Sync (via > Aux Jr) and Power- Data. I never tested a surge suppressor. Which ones work > with the thing? > Chuck, What say you? > > Sam > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 <(575)%20758-7598> Office > www.Taosnet.com <http://www.newmex.com> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
