Oh, and you have the injector jumpered for all 4 pairs?

On Mon, Mar 26, 2018, 12:09 PM Forrest Christian (List Account) <
[email protected]> wrote:

> Is the sync pulse disabled or no gps receiver connected?
>
> How long of a wire?
>
> On Mon, Mar 26, 2018, 9:52 AM Sam Lambie <[email protected]> wrote:
>
>> Timing is being done on the Aux Port. Nothing going through the Power
>> Port. I'll give the Gas tube version a shot if you got it.
>>
>> On Mon, Mar 26, 2018 at 9:37 AM, <[email protected]> wrote:
>>
>>> OK, so grounds are related to the problem.
>>>
>>> There may be something unusual with timing pulses on the power that is
>>> causing the surge suppressor to fire.
>>> Forrest would know much more than I about that.
>>>
>>> I honestly don’t know if anyone has tried my product with a Medusa
>>> before.
>>> I have a 100% gas tube version that may solve the problem.
>>>
>>>
>>> *From:* Sam Lambie
>>> *Sent:* Monday, March 26, 2018 9:18 AM
>>> *To:* [email protected]
>>> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with
>>> Medusa
>>>
>>> I did pull it from the rack and let it float, no change, however, I
>>> didn't reboot it while the card was floating.
>>>
>>> On Sun, Mar 25, 2018 at 3:15 PM, <[email protected]> wrote:
>>>
>>>> When this gets sent....
>>>> Sorry you are having difficulty.
>>>>
>>>> I would pull it from the rack and see if the interruption of the ground
>>>> fixes the problem.
>>>>
>>>> The issue is either noise to/from the ground.
>>>> or
>>>> Transverse impulses getting clamped.  Could be something about the new
>>>> timing stuff that I don’t understand.
>>>> Forrest is probably better versed in thinking about this than I am.
>>>>
>>>> Perhaps the server got launched by Elon Musk and the time delay is just
>>>> accumulating.
>>>>
>>>> *From:* Sam Lambie
>>>> *Sent:* Sunday, March 25, 2018 6:10 AM
>>>> *To:* [email protected]
>>>> *Subject:* [AFMUG] mccowntech rack mount surge suppressor with Medusa
>>>>
>>>> Yo smart folks,
>>>>
>>>> I put a gige APC HV rack mount surge suppressor inline with a Cambium
>>>> Medusa today. It booted up, got in about 20 pings and then the Packetflux
>>>> SyncInjector shutdown. Tried putting the Ethernet cable directly in the
>>>> SyncInjector and it worked, just like on the bench when I tested Sync (via
>>>> Aux Jr) and Power- Data. I never tested a surge suppressor. Which ones work
>>>> with the thing?
>>>> Chuck, What say you?
>>>>
>>>> Sam
>>>>
>>>> --
>>>> --
>>>> *Sam Lambie*
>>>> Taosnet Wireless Tech.
>>>> 575-758-7598 <(575)%20758-7598> Office
>>>> www.Taosnet.com <http://www.newmex.com>
>>>>
>>>
>>>
>>>
>>> --
>>> --
>>> *Sam Lambie*
>>> Taosnet Wireless Tech.
>>> 575-758-7598 <(575)%20758-7598> Office
>>> www.Taosnet.com <http://www.newmex.com>
>>>
>>
>>
>>
>> --
>> --
>> *Sam Lambie*
>> Taosnet Wireless Tech.
>> 575-758-7598 Office
>> www.Taosnet.com <http://www.newmex.com>
>>
>

Reply via email to