Timing is being done on the Aux Port. Nothing going through the Power Port. I'll give the Gas tube version a shot if you got it.
On Mon, Mar 26, 2018 at 9:37 AM, <[email protected]> wrote: > OK, so grounds are related to the problem. > > There may be something unusual with timing pulses on the power that is > causing the surge suppressor to fire. > Forrest would know much more than I about that. > > I honestly don’t know if anyone has tried my product with a Medusa before. > I have a 100% gas tube version that may solve the problem. > > > *From:* Sam Lambie > *Sent:* Monday, March 26, 2018 9:18 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa > > I did pull it from the rack and let it float, no change, however, I didn't > reboot it while the card was floating. > > On Sun, Mar 25, 2018 at 3:15 PM, <[email protected]> wrote: > >> When this gets sent.... >> Sorry you are having difficulty. >> >> I would pull it from the rack and see if the interruption of the ground >> fixes the problem. >> >> The issue is either noise to/from the ground. >> or >> Transverse impulses getting clamped. Could be something about the new >> timing stuff that I don’t understand. >> Forrest is probably better versed in thinking about this than I am. >> >> Perhaps the server got launched by Elon Musk and the time delay is just >> accumulating. >> >> *From:* Sam Lambie >> *Sent:* Sunday, March 25, 2018 6:10 AM >> *To:* [email protected] >> *Subject:* [AFMUG] mccowntech rack mount surge suppressor with Medusa >> >> Yo smart folks, >> >> I put a gige APC HV rack mount surge suppressor inline with a Cambium >> Medusa today. It booted up, got in about 20 pings and then the Packetflux >> SyncInjector shutdown. Tried putting the Ethernet cable directly in the >> SyncInjector and it worked, just like on the bench when I tested Sync (via >> Aux Jr) and Power- Data. I never tested a surge suppressor. Which ones work >> with the thing? >> Chuck, What say you? >> >> Sam >> >> -- >> -- >> *Sam Lambie* >> Taosnet Wireless Tech. >> 575-758-7598 <(575)%20758-7598> Office >> www.Taosnet.com <http://www.newmex.com> >> > > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 <(575)%20758-7598> Office > www.Taosnet.com <http://www.newmex.com> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
