OK, so grounds are related to the problem. There may be something unusual with timing pulses on the power that is causing the surge suppressor to fire. Forrest would know much more than I about that.
I honestly don’t know if anyone has tried my product with a Medusa before. I have a 100% gas tube version that may solve the problem. From: Sam Lambie Sent: Monday, March 26, 2018 9:18 AM To: [email protected] Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa I did pull it from the rack and let it float, no change, however, I didn't reboot it while the card was floating. On Sun, Mar 25, 2018 at 3:15 PM, <[email protected]> wrote: When this gets sent.... Sorry you are having difficulty. I would pull it from the rack and see if the interruption of the ground fixes the problem. The issue is either noise to/from the ground. or Transverse impulses getting clamped. Could be something about the new timing stuff that I don’t understand. Forrest is probably better versed in thinking about this than I am. Perhaps the server got launched by Elon Musk and the time delay is just accumulating. From: Sam Lambie Sent: Sunday, March 25, 2018 6:10 AM To: [email protected] Subject: [AFMUG] mccowntech rack mount surge suppressor with Medusa Yo smart folks, I put a gige APC HV rack mount surge suppressor inline with a Cambium Medusa today. It booted up, got in about 20 pings and then the Packetflux SyncInjector shutdown. Tried putting the Ethernet cable directly in the SyncInjector and it worked, just like on the bench when I tested Sync (via Aux Jr) and Power- Data. I never tested a surge suppressor. Which ones work with the thing? Chuck, What say you? Sam -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com
