GPS is not physically connected to input of SyncInjector now daisy chained from the other Syncinjectors, the AP is getting timing from Syncbox jr via UGPS power setting on radio . Cat6 is 115' long. I didn't even know that jumpering was an option. I guess I have to RTFM for the jumper location on the syncinjector? Can you please point me to the manual? I have never been able to find any documentation on these things...
On Mon, Mar 26, 2018 at 12:10 PM, Forrest Christian (List Account) < [email protected]> wrote: > Oh, and you have the injector jumpered for all 4 pairs? > > On Mon, Mar 26, 2018, 12:09 PM Forrest Christian (List Account) < > [email protected]> wrote: > >> Is the sync pulse disabled or no gps receiver connected? >> >> How long of a wire? >> >> On Mon, Mar 26, 2018, 9:52 AM Sam Lambie <[email protected]> wrote: >> >>> Timing is being done on the Aux Port. Nothing going through the Power >>> Port. I'll give the Gas tube version a shot if you got it. >>> >>> On Mon, Mar 26, 2018 at 9:37 AM, <[email protected]> wrote: >>> >>>> OK, so grounds are related to the problem. >>>> >>>> There may be something unusual with timing pulses on the power that is >>>> causing the surge suppressor to fire. >>>> Forrest would know much more than I about that. >>>> >>>> I honestly don’t know if anyone has tried my product with a Medusa >>>> before. >>>> I have a 100% gas tube version that may solve the problem. >>>> >>>> >>>> *From:* Sam Lambie >>>> *Sent:* Monday, March 26, 2018 9:18 AM >>>> *To:* [email protected] >>>> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with >>>> Medusa >>>> >>>> I did pull it from the rack and let it float, no change, however, I >>>> didn't reboot it while the card was floating. >>>> >>>> On Sun, Mar 25, 2018 at 3:15 PM, <[email protected]> wrote: >>>> >>>>> When this gets sent.... >>>>> Sorry you are having difficulty. >>>>> >>>>> I would pull it from the rack and see if the interruption of the >>>>> ground fixes the problem. >>>>> >>>>> The issue is either noise to/from the ground. >>>>> or >>>>> Transverse impulses getting clamped. Could be something about the new >>>>> timing stuff that I don’t understand. >>>>> Forrest is probably better versed in thinking about this than I am. >>>>> >>>>> Perhaps the server got launched by Elon Musk and the time delay is >>>>> just accumulating. >>>>> >>>>> *From:* Sam Lambie >>>>> *Sent:* Sunday, March 25, 2018 6:10 AM >>>>> *To:* [email protected] >>>>> *Subject:* [AFMUG] mccowntech rack mount surge suppressor with Medusa >>>>> >>>>> Yo smart folks, >>>>> >>>>> I put a gige APC HV rack mount surge suppressor inline with a Cambium >>>>> Medusa today. It booted up, got in about 20 pings and then the Packetflux >>>>> SyncInjector shutdown. Tried putting the Ethernet cable directly in the >>>>> SyncInjector and it worked, just like on the bench when I tested Sync (via >>>>> Aux Jr) and Power- Data. I never tested a surge suppressor. Which ones >>>>> work >>>>> with the thing? >>>>> Chuck, What say you? >>>>> >>>>> Sam >>>>> >>>>> -- >>>>> -- >>>>> *Sam Lambie* >>>>> Taosnet Wireless Tech. >>>>> 575-758-7598 <(575)%20758-7598> Office >>>>> www.Taosnet.com <http://www.newmex.com> >>>>> >>>> >>>> >>>> >>>> -- >>>> -- >>>> *Sam Lambie* >>>> Taosnet Wireless Tech. >>>> 575-758-7598 <(575)%20758-7598> Office >>>> www.Taosnet.com <http://www.newmex.com> >>>> >>> >>> >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 <(575)%20758-7598> Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
