Kurt,
I've had just the opposite experience. If I want to get frustrated
I boot into Linux. I use windows heavily at work and have learned
lots of tricks, etc. Linux just mystifies me. For what it's worth,
Altos and all of the various boards were all done on a Linux system.
So that can't be your issue. There is something else going on, as you
suspect. Good luck and let us know how you get on.
Terry
On 1/31/2015 1:37 PM, Kurt wrote:
Yeah,
I'll wait to hear from B'dale or Keith. Funny, I can't get the
thing connected in Win7 64 bit. Software loads but the device isn't
recognized.
Makes me realize why I spend more time in Linux now. WinBlows takes
away the ability to easily trouble shoot. Oh well. Thanks for all
the advice all.
Kurt
------------------------------------------------------------------------
*From:* Terry.w7ami <[email protected]>
*To:* [email protected]
*Sent:* Sunday, February 1, 2015 12:54 PM
*Subject:* Re: [altusmetrum] Contact Form
Kurt,
I didn't see anything in your settings that would have kept the APRS
data from being sent. It sounds like your unit may need to go back
and be looked at if Doug's suggestion of loading an older version of FW
doesn't change anything.
Terry
On 1/31/2015 10:56 AM, Kurt wrote:
> Thanks Terry,
>
> Doug sent me an audio file of his unit and it doesn't sound like
anything mine is producing. I'll
> try similar settings as yours and see if I can get it to work. I
was programming on a linux computer
> and I'm going to go upstairs later and try programming with a
Windows 7 machine. I'm not certain
> it will make much difference though because when I read my unit, it
will show the setting changes
> I input and the latest firmware that I flashed. Kurt KC9LDH
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
