Kevin, I just received a new TeleBT and plugged it into computer via USB cable to charge the battery. A red LED came on to indicate charging. This LED went out and a green LED came on after some time. I am assuming that this means the battery was fully charged. I did not see this description in the latest version of the Altos user's manual, however. Ed Chess
-----Original Message----- From: altusmetrum [mailto:[email protected]] On Behalf Of Kevin Trojanowski Sent: Thursday, July 30, 2015 8:30 PM To: 'Altus Metrum' <[email protected]> Subject: Re: [altusmetrum] Tele BT When a Telemetrum or TeleMega are in launch mode, they're transmit only so you should be able to receive packets on both your laptop and phone at the same time. -Kevin -----Original Message----- From: altusmetrum [mailto:[email protected]] On Behalf Of Tim Navickas Sent: Thursday, July 30, 2015 7:11 PM To: 'Altus Metrum' Subject: [altusmetrum] Tele BT This may be a dumb question but is there anywhere that describes how to know when the TeleBT is fully charged? Also, Can a TeleBT be connected to the Telemtrum via phone and at the same time a teledongle be connected to the same Telemetrum via computer? Thanks, Tim _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
