Running into an error on the BPCU program. I have a ticket (actually two) into BMC support but no response yet. Wondering if anyone else has hit this.
It starts fine, reads the hash file and gets the ARConnection with the server. It then starts to run the ReportDiff mode and givs me the following: INFO - ReportDiff mode - Taking snapshot of the server ERROR - Failed to execute BPCU command : ERROR (8887) : Data operations are not allowed in Full Mode.; It then creates a log which it puts in the BPCU log form that basically says the same thing. I've tried setting it in Admin mode (even restarted ARS after that to no avail). I also tried to run it in Overlay mode but I hit the same error. The only thing I've found so far in looking up error 8887 or Full Mode is a reference to Migrator in 7.6.04 - seems someone upgraded from sp1 to sp3 to resolve it. But I would think that if it was resolved in 7.6.04 it should be OK in 8.1. Any thoughts on how it sets ReportDiff Mode and if I can set it correctly (possibly in the ar.conf file)? thank you - pritch _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years"
