So, i think i got this to work, i have to test it with "real links" but i
think its working.
If anyone needs the configuration, let me know
Nico
On Tue, 28 Nov 2006, Marc Storck wrote:
In the mean time I tested this overhere, but with only two links (1 link for
each linkset), only the first link has an schannel.
Using this config the channels on l2 stay in Idle Reset pending status,
trying to block and unblock channels has the following results:
Nov 28 16:56:39 NOTICE[5667]: l4isup.c:3598 do_group_circuit_block_unblock:
Sending CIRCUIT GROUP BLOCKING, cic=33, mask=0x00000001.
Nov 28 16:56:39 WARNING[658]: mtp.c:1669 mtp_thread_main: No signalling links
inservice and no cluster receivers alive, dropping packet!
Blocking and unblocking request from far end are ignored as no CICs are
assigned to linkset to which schannel from l1 is assigned.
The ss7 driver however does not complain about the config itself, so either
the config error checking isn't checking this, or the driver takes the
binding of Schannel ==> linlkset to strictly....
Who can tell???
Thanks,
Marc
Goke Aruna wrote:
yes... with chan_ss7.
i have this sample and its working now.
[linkset-xyz]
enabled => yes
enable_st => no
use_connect => no
hunting_policy => seq_lth
subservice => auto
language => en
context => xyz-out
[linkset-abc]
enabled => yes
enable_st => no
use_connect => no
hunting_policy => seq_lth
subservice => auto
language => en
context => abc-out
[link-l1]
linkset => xyz
channels => 1-15,17-31
schannel => 16
firstcic => 1
echocancel=allways
echocan_taps=32
echocan_train=350
enabled => yes
[link-l2]
linkset => xyz
channels => 1-15,17-31
schannel =>
firstcic => 33
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => yes
[link-l3]
linkset => abc
channels => 1-15,17-31
schannel =>
firstcic => 65
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => yes
[link-l4]
linkset => abc
channels => 1-15,17-31
schannel =>
firstcic => 97
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => yes
[host-myhost]
enabled => yes
opc => 609
default_linkset => xyz
dpc => xyz:223,abc:223
links => l1:1,l2:2,l3:3,l4:4
i have this ss7.conf
and its working for me.
that is question number 1.
i think question number 2 should not be a question since u said u used
the two box to test before.
goksie
[EMAIL PROTECTED] wrote:
Is noone there who can answer my questions?
:-(
On Wed, 22 Nov 2006, [EMAIL PROTECTED] wrote:
Hello,
I have some feature-questions.
1.)
I have one Asterisk Box with SS7 and 4 E1 Ports.
i have one Telco with 4 Routings, a a high quality routing, a quality
Routing a cheap routing and a cheaper routing.
The telco did not give me 4 SS7 Signalling Links.
Is it Possible to get this running with chan_ss7 or libss7?
2.)
I have 2 Asterisk boxes and one SS7-Signalling Link, is it possible to
make the signalling for the second box with the Signalling link on the
first Box?
Thanks a lot for your help
Nico
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
