well of course I'm testing with chan_ss7 version 0.9 :-D
Goke Aruna wrote:
I tested that config on chan_ss7 and its working fine. I dont know of libss7
goksie
On 11/28/06, *Marc Storck* < [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
In the mean time I tested this overhere, but with only two links (1
link
for each linkset), only the first link has an schannel.
Using this config the channels on l2 stay in Idle Reset pending status,
trying to block and unblock channels has the following results:
Nov 28 16:56:39 NOTICE[5667]: l4isup.c:3598
do_group_circuit_block_unblock: Sending CIRCUIT GROUP BLOCKING, cic=33,
mask=0x00000001.
Nov 28 16:56:39 WARNING[658]: mtp.c:1669 mtp_thread_main: No signalling
links inservice and no cluster receivers alive, dropping packet!
Blocking and unblocking request from far end are ignored as no CICs are
assigned to linkset to which schannel from l1 is assigned.
The ss7 driver however does not complain about the config itself, so
either the config error checking isn't checking this, or the driver
takes the binding of Schannel ==> linlkset to strictly....
Who can tell???
Thanks,
Marc
Goke Aruna wrote:
> yes... with chan_ss7.
>
> i have this sample and its working now.
>
> [linkset-xyz]
> enabled => yes
> enable_st => no
> use_connect => no
> hunting_policy => seq_lth
> subservice => auto
> language => en
> context => xyz-out
>
> [linkset-abc]
> enabled => yes
> enable_st => no
> use_connect => no
> hunting_policy => seq_lth
> subservice => auto
> language => en
> context => abc-out
>
> [link-l1]
> linkset => xyz
> channels => 1-15,17-31
> schannel => 16
> firstcic => 1
> echocancel=allways
> echocan_taps=32
> echocan_train=350
> enabled => yes
>
> [link-l2]
> linkset => xyz
> channels => 1-15,17-31
> schannel =>
> firstcic => 33
> echocancel=allways
> echocan_taps=32
> ;echocan_train=350
> enabled => yes
>
> [link-l3]
> linkset => abc
> channels => 1-15,17-31
> schannel =>
> firstcic => 65
> echocancel=allways
> echocan_taps=32
> ;echocan_train=350
> enabled => yes
>
> [link-l4]
> linkset => abc
> channels => 1-15,17-31
> schannel =>
> firstcic => 97
> echocancel=allways
> echocan_taps=32
> ;echocan_train=350
> enabled => yes
>
> [host-myhost]
> enabled => yes
> opc => 609
> default_linkset => xyz
> dpc => xyz:223,abc:223
> links => l1:1,l2:2,l3:3,l4:4
>
>
> i have this ss7.conf
>
> and its working for me.
>
> that is question number 1.
>
> i think question number 2 should not be a question since u said u
used
> the two box to test before.
>
> goksie
>
>
> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> wrote:
>> Is noone there who can answer my questions?
>>
>> :-(
>>
>>
>> On Wed, 22 Nov 2006, [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> wrote:
>>
>>> Hello,
>>>
>>> I have some feature-questions.
>>>
>>> 1.)
>>> I have one Asterisk Box with SS7 and 4 E1 Ports.
>>> i have one Telco with 4 Routings, a a high quality routing, a
quality
>>> Routing a cheap routing and a cheaper routing.
>>> The telco did not give me 4 SS7 Signalling Links.
>>> Is it Possible to get this running with chan_ss7 or libss7?
>>>
>>>
>>>
>>> 2.)
>>> I have 2 Asterisk boxes and one SS7-Signalling Link, is it
possible to
>>> make the signalling for the second box with the Signalling link
on the
>>> first Box?
>>>
>>>
>>>
>>> Thanks a lot for your help
>>>
>>>
>>> Nico
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com> --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
<http://lists.digium.com/mailman/listinfo/asterisk-ss7>
>>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com> --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com> --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com> --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
