Thanks for the input guys. I guess that is the case as they have run out of pairs. But with a T1 in place shouldn't the third party internet provider be able to easily change the signaling to PRI without even involving Bell Canada? do you think there is some company bureaucracy that plays here or is it that Bell has to actually do something on their end as well to change this T1 line into a PRI. Change from:Site - Cisco Router + T1 interface > Bell providing lines - third company T1 interface providing internet To:Site - Asterisk+PRI card > Bell PRI equipment > third company PRI equipment I am wondering if Bell is even need to put PRI equpiment in between or if they their loop equipment to third company is able to connect either of internet or PRI over the same equipment which makes more sense to me as Bell is only a connect point and it's only a pair of cables and nothing else. Thanks again
> Date: Tue, 23 Feb 2010 15:02:16 -0500 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [on-asterisk] T1 conversion to PRI - To Telco Gurus > > Bruce, they may be telling you this because they have ran out of pairs > to the target unit and the exsisting pairs are leased by a 3rd party. > > > Bruce N wrote: > > Hi Guys, > > I am wondering if any of you guys have experience with converting a T1 to a > > PRI. I have a situation where Bell says there is no facility to install a > > PRI circuit but there are two T1 circuits already installed on site. I can > > disconnect both or one in favor of PRI. The T1s are provided by yet another > > company but of course they are leasing Bell lines. > > They are just complicating and delaying the whole process even with my > > option of converting T1 to PRI. > > Any thoughts? it will help me understand the feasibility better and maybe > > train those lazy order managers on it. > > Thanks,Bruce > > _________________________________________________________________ > > Introducing Windows® phone. > > http://go.microsoft.com/?linkid=9708122 > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > _________________________________________________________________
