Hi all I have come across a bit of a problem with my new 1.0.2(1.8.9.2) AstLinux installation.
My build: Via EPIA Mini-ITX with C3 CPU, with an X100P card. The X100P card I have is capable of handling complex impedances, with a patched wcfxo module (It's this one: http://x100p.com/products/FXO.php - there is a link on the page to a pdf which gives instructions on how to patch the Zaptel wcfxo kernel module). I have used the correct installation image for my hardware. I have got everything up and running bar outgoing calls via PSTN. I listen on the line, the card picks up the line, I hear dialtone, and I hear the outbound DTMF. However, the dialtone does not end once dialing starts. I suspect that this is because i haven't been able to set the line standards on the card. I am in New Zealand, so I require the complex impedance capability. One thing I have noticed is that even though I have the line 'MODOPTS="wcfxo:opermode=1"' in /mnt/kd/rc.conf.d/user.conf, that is does not set the mode to CTR21. It also seems like I can't patch wcfxo, as there's no sources, and I don't know how to get what's required. So a few things really: 1. Can anyone provide me with a patched wcfxo module (I'll also need to know where to put it so it doesn't disappear after a reboot) 2. How can I ensure that that when the module loads, it does so with the opermode option regards Frank ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
