Hi Lonnie
Thanks for that
I've at least now got the mode set to CTR21 now with your help.
Unfortunately, without those extra modes compiled into wcfxo, it just
looks like that card is not going to work on a New Zealand telco for
dialing out, as it's still doing the same thing.
regards
Frank
On 18/3/2012, "Lonnie Abelbeck" <li...@lonnie.abelbeck.com> wrote:
>Hi Frank,
>
>I assume you have in your /mnt/kd/rc.conf.d/user.conf the line:
>
>DAHDIMODS="wcfxo dahdi_echocan_oslec"
>
>(or should wcfxo be wctdm ?) or something similar.
>
>Next, the MODOPTS rc.conf variable has been removed for quite some time ago,
>the new method is editing the "/etc/modprobe.d/options.conf" file. Example..
>
>Edit Tab -> "modprobe.d/options.conf" { >> Open File }
>
>-- (add the one line, again, should wcfxo be wctdm ?)
>options wcfxo opermode=1
>--
>Click { Save Changes }
>
>Then, to cleanup...
>
>Network Tab -> User System Variables -> Edit User variables
>
>(remove MODOPTS line, so as to not be confusing)
>
>Finally, reboot...
>
>That may help. Note that DAHDI is the interface to your card, not Zaptel
>anymore.
>
>http://doc.astlinux.org/userdoc:dahdi
>
>
>Lonnie
>
>
>
>On Mar 18, 2012, at 3:05 AM, Frank Collingwood wrote:
>
>> Hi all
>>
>> I have come across a bit of a problem with my new 1.0.2(1.8.9.2) AstLinux
>> installation.
>>
>> My build:
>>
>> Via EPIA Mini-ITX with C3 CPU, with an X100P card. The X100P card I have
>> is capable of handling complex impedances, with a patched wcfxo module
>> (It's this one: http://x100p.com/products/FXO.php - there is a link on
>> the page to a pdf which gives instructions on how to patch the Zaptel
>> wcfxo kernel module). I have used the correct installation image for my
>> hardware.
>>
>> I have got everything up and running bar outgoing calls via PSTN. I
>> listen on the line, the card picks up the line, I hear dialtone, and I
>> hear the outbound DTMF. However, the dialtone does not end once dialing
>> starts. I suspect that this is because i haven't been able to set the
>> line standards on the card.
>>
>> I am in New Zealand, so I require the complex impedance capability.
>>
>> One thing I have noticed is that even though I have the line
>> 'MODOPTS="wcfxo:opermode=1"' in /mnt/kd/rc.conf.d/user.conf, that is
>> does not set the mode to CTR21.
>>
>> It also seems like I can't patch wcfxo, as there's no sources, and I
>> don't know how to get what's required.
>>
>> So a few things really:
>>
>> 1. Can anyone provide me with a patched wcfxo module (I'll also need to
>> know where to put it so it doesn't disappear after a reboot)
>> 2. How can I ensure that that when the module loads, it does so with the
>> opermode option
>>
>> regards
>>
>> Frank
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
