Hi Frank,
I assume you have in your /mnt/kd/rc.conf.d/user.conf the line:
DAHDIMODS="wcfxo dahdi_echocan_oslec"
(or should wcfxo be wctdm ?) or something similar.
Next, the MODOPTS rc.conf variable has been removed for quite some time ago,
the new method is editing the "/etc/modprobe.d/options.conf" file. Example...
Edit Tab -> "modprobe.d/options.conf" { >> Open File }
-- (add the one line, again, should wcfxo be wctdm ?)
options wcfxo opermode=1
--
Click { Save Changes }
Then, to cleanup...
Network Tab -> User System Variables -> Edit User variables
(remove MODOPTS line, so as to not be confusing)
Finally, reboot...
That may help. Note that DAHDI is the interface to your card, not Zaptel
anymore.
http://doc.astlinux.org/userdoc:dahdi
Lonnie
On Mar 18, 2012, at 3:05 AM, Frank Collingwood wrote:
> Hi all
>
> I have come across a bit of a problem with my new 1.0.2(1.8.9.2) AstLinux
> installation.
>
> My build:
>
> Via EPIA Mini-ITX with C3 CPU, with an X100P card. The X100P card I have
> is capable of handling complex impedances, with a patched wcfxo module
> (It's this one: http://x100p.com/products/FXO.php - there is a link on
> the page to a pdf which gives instructions on how to patch the Zaptel
> wcfxo kernel module). I have used the correct installation image for my
> hardware.
>
> I have got everything up and running bar outgoing calls via PSTN. I
> listen on the line, the card picks up the line, I hear dialtone, and I
> hear the outbound DTMF. However, the dialtone does not end once dialing
> starts. I suspect that this is because i haven't been able to set the
> line standards on the card.
>
> I am in New Zealand, so I require the complex impedance capability.
>
> One thing I have noticed is that even though I have the line
> 'MODOPTS="wcfxo:opermode=1"' in /mnt/kd/rc.conf.d/user.conf, that is
> does not set the mode to CTR21.
>
> It also seems like I can't patch wcfxo, as there's no sources, and I
> don't know how to get what's required.
>
> So a few things really:
>
> 1. Can anyone provide me with a patched wcfxo module (I'll also need to
> know where to put it so it doesn't disappear after a reboot)
> 2. How can I ensure that that when the module loads, it does so with the
> opermode option
>
> regards
>
> Frank
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
