Frank,
Also view the results of "modinfo wcfxo" and "modinfo wctdm" and google the
'parm' accordingly, that may help.
Lonnie
On Mar 18, 2012, at 8:16 AM, Lonnie Abelbeck wrote:
> Did you try using the wctdm kernel driver instead of wcfxo ? (both places)
>
> Maybe it has the extra modes you need, only guessing...
>
> Lonnie
>
> On Mar 18, 2012, at 8:09 AM, Frank Collingwood wrote:
>
>> Hi Lonnie
>>
>> Thanks for that
>>
>> I've at least now got the mode set to CTR21 now with your help.
>> Unfortunately, without those extra modes compiled into wcfxo, it just
>> looks like that card is not going to work on a New Zealand telco for
>> dialing out, as it's still doing the same thing.
>>
>> regards
>>
>> Frank
>>
>> On 18/3/2012, "Lonnie Abelbeck" <li...@lonnie.abelbeck.com> wrote:
>>
>>> Hi Frank,
>>>
>>> I assume you have in your /mnt/kd/rc.conf.d/user.conf the line:
>>>
>>> DAHDIMODS="wcfxo dahdi_echocan_oslec"
>>>
>>> (or should wcfxo be wctdm ?) or something similar.
>>>
>>> Next, the MODOPTS rc.conf variable has been removed for quite some time
>>> ago, the new method is editing the "/etc/modprobe.d/options.conf" file.
>>> Example..
>>>
>>> Edit Tab -> "modprobe.d/options.conf" { >> Open File }
>>>
>>> -- (add the one line, again, should wcfxo be wctdm ?)
>>> options wcfxo opermode=1
>>> --
>>> Click { Save Changes }
>>>
>>> Then, to cleanup...
>>>
>>> Network Tab -> User System Variables -> Edit User variables
>>>
>>> (remove MODOPTS line, so as to not be confusing)
>>>
>>> Finally, reboot...
>>>
>>> That may help. Note that DAHDI is the interface to your card, not Zaptel
>>> anymore.
>>>
>>> http://doc.astlinux.org/userdoc:dahdi
>>>
>>>
>>> Lonnie
>>>
>>>
>>>
>>> On Mar 18, 2012, at 3:05 AM, Frank Collingwood wrote:
>>>
>>>> Hi all
>>>>
>>>> I have come across a bit of a problem with my new 1.0.2(1.8.9.2) AstLinux
>>>> installation.
>>>>
>>>> My build:
>>>>
>>>> Via EPIA Mini-ITX with C3 CPU, with an X100P card. The X100P card I have
>>>> is capable of handling complex impedances, with a patched wcfxo module
>>>> (It's this one: http://x100p.com/products/FXO.php - there is a link on
>>>> the page to a pdf which gives instructions on how to patch the Zaptel
>>>> wcfxo kernel module). I have used the correct installation image for my
>>>> hardware.
>>>>
>>>> I have got everything up and running bar outgoing calls via PSTN. I
>>>> listen on the line, the card picks up the line, I hear dialtone, and I
>>>> hear the outbound DTMF. However, the dialtone does not end once dialing
>>>> starts. I suspect that this is because i haven't been able to set the
>>>> line standards on the card.
>>>>
>>>> I am in New Zealand, so I require the complex impedance capability.
>>>>
>>>> One thing I have noticed is that even though I have the line
>>>> 'MODOPTS="wcfxo:opermode=1"' in /mnt/kd/rc.conf.d/user.conf, that is
>>>> does not set the mode to CTR21.
>>>>
>>>> It also seems like I can't patch wcfxo, as there's no sources, and I
>>>> don't know how to get what's required.
>>>>
>>>> So a few things really:
>>>>
>>>> 1. Can anyone provide me with a patched wcfxo module (I'll also need to
>>>> know where to put it so it doesn't disappear after a reboot)
>>>> 2. How can I ensure that that when the module loads, it does so with the
>>>> opermode option
>>>>
>>>> regards
>>>>
>>>> Frank
>>
>> ------------------------------------------------------------------------------
>> This SF email is sponsosred by:
>> Try Windows Azure free for 90 days Click Here
>> http://p.sf.net/sfu/sfd2d-msazure
>> _______________________________________________
>> Astlinux-users mailing list
>> Astlinux-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>>
>> Donations to support AstLinux are graciously accepted via PayPal to
>> pay...@krisk.org.
>>
>>
>
>
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________
> Astlinux-users mailing list
> Astlinux-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
>
>
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
