Did you try using the wctdm kernel driver instead of wcfxo ? (both places)
Maybe it has the extra modes you need, only guessing...
Lonnie
On Mar 18, 2012, at 8:09 AM, Frank Collingwood wrote:
> Hi Lonnie
>
> Thanks for that
>
> I've at least now got the mode set to CTR21 now with your help.
> Unfortunately, without those extra modes compiled into wcfxo, it just
> looks like that card is not going to work on a New Zealand telco for
> dialing out, as it's still doing the same thing.
>
> regards
>
> Frank
>
> On 18/3/2012, "Lonnie Abelbeck" <li...@lonnie.abelbeck.com> wrote:
>
>> Hi Frank,
>>
>> I assume you have in your /mnt/kd/rc.conf.d/user.conf the line:
>>
>> DAHDIMODS="wcfxo dahdi_echocan_oslec"
>>
>> (or should wcfxo be wctdm ?) or something similar.
>>
>> Next, the MODOPTS rc.conf variable has been removed for quite some time ago,
>> the new method is editing the "/etc/modprobe.d/options.conf" file. Example..
>>
>> Edit Tab -> "modprobe.d/options.conf" { >> Open File }
>>
>> -- (add the one line, again, should wcfxo be wctdm ?)
>> options wcfxo opermode=1
>> --
>> Click { Save Changes }
>>
>> Then, to cleanup...
>>
>> Network Tab -> User System Variables -> Edit User variables
>>
>> (remove MODOPTS line, so as to not be confusing)
>>
>> Finally, reboot...
>>
>> That may help. Note that DAHDI is the interface to your card, not Zaptel
>> anymore.
>>
>> http://doc.astlinux.org/userdoc:dahdi
>>
>>
>> Lonnie
>>
>>
>>
>> On Mar 18, 2012, at 3:05 AM, Frank Collingwood wrote:
>>
>>> Hi all
>>>
>>> I have come across a bit of a problem with my new 1.0.2(1.8.9.2) AstLinux
>>> installation.
>>>
>>> My build:
>>>
>>> Via EPIA Mini-ITX with C3 CPU, with an X100P card. The X100P card I have
>>> is capable of handling complex impedances, with a patched wcfxo module
>>> (It's this one: http://x100p.com/products/FXO.php - there is a link on
>>> the page to a pdf which gives instructions on how to patch the Zaptel
>>> wcfxo kernel module). I have used the correct installation image for my
>>> hardware.
>>>
>>> I have got everything up and running bar outgoing calls via PSTN. I
>>> listen on the line, the card picks up the line, I hear dialtone, and I
>>> hear the outbound DTMF. However, the dialtone does not end once dialing
>>> starts. I suspect that this is because i haven't been able to set the
>>> line standards on the card.
>>>
>>> I am in New Zealand, so I require the complex impedance capability.
>>>
>>> One thing I have noticed is that even though I have the line
>>> 'MODOPTS="wcfxo:opermode=1"' in /mnt/kd/rc.conf.d/user.conf, that is
>>> does not set the mode to CTR21.
>>>
>>> It also seems like I can't patch wcfxo, as there's no sources, and I
>>> don't know how to get what's required.
>>>
>>> So a few things really:
>>>
>>> 1. Can anyone provide me with a patched wcfxo module (I'll also need to
>>> know where to put it so it doesn't disappear after a reboot)
>>> 2. How can I ensure that that when the module loads, it does so with the
>>> opermode option
>>>
>>> regards
>>>
>>> Frank
>
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________
> Astlinux-users mailing list
> Astlinux-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> pay...@krisk.org.
>
>
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
