arnyk wrote: 
> Indeed. 
> 
> Reference: 'I2SBUS.pdf'
> (https://www.sparkfun.com/datasheets/BreakoutBoards/I2SBUS.pdf)
> 
> Reality is that in i2s there is one clock line and one data line,
> 
> Changes to the shared clock line that affect one channel will affect the
> other channel if the change to the clock has a duration of one data word
> or more since the channels are interleaved on one data line.
> 
> This is because any change to the clock line that lasts longer than the
> time to transmit one data word naturally affects the next data word for
> the other channel.
> 
> So what are we talking about here?
> 
> @44 KHz  two channels are transmitted every 22 microseconds. So any
> change to the clock that lasts longer than 22 microseconds will affect
> both channels. any change that lasts longer than 44 microseconds will
> affect both channels identically.  This corresponds to a jitter
> frequency of approximately 2200 Hz.  That means that any clock jitter at
> 2200 Hz or lower will affect both channels identically, and any clock
> jitter at 4400 Hz or lower will affect both channels somewhat.
> 
> Since we were talking about clock variations that lasted for several
> seconds there is no doubt that these variations will affect both
> channels identically.
> 
> So before Jkeny deflected there was another questions for him to answer:
> 
> jkeny do you OEM DACs from someone who actually understands them? That
> would explain lots of things.
> 
> (BTW there is an old adage that a lawyer never asks a question that he
> doesn't know the answer to. I'm not a lawyer but I've worked with
> them...)
Again, you can't but demonstrate your stupidity, Arny, can you?

Yes the timing difference that last for 2 seconds will affect both
channels.
Do you think that this jump in timing at the start of this 2 seconds
happens instantaneously i.e it has no timing - it is instant? Do you
really want to maintain that?
Do you want to similarly maintain that the fall back from 8ppm timing
issue to normal happens in an instant?

Really, Arny give up & stop digging yourself a hole from your own
stupidity


------------------------------------------------------------------------
jkeny's Profile: http://forums.slimdevices.com/member.php?userid=35192
View this thread: http://forums.slimdevices.com/showthread.php?t=103684

_______________________________________________
audiophiles mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/audiophiles

Reply via email to