On Fri, 27 Sep 2013, Robert Nelson wrote:
> On Fri, Sep 27, 2013 at 7:45 AM, Saransh Jain <saransh1...@gmail.com> wrote:
> > i used the address 80008000 (-a option in mkimage) for the uImage.i used the
> > same address as the entry address(-e option).
> >
> > Also can you confirm the points i said in the previous post.That would
> > clarify a lot to me.
>
> I'll leave that issue to someone else...
>
> > I believe that the -a option in mkimage is irrelevant.I think the relevent
> > address in the mkimage command is the entry image address(-e option).This
> > address is used by u-boot to copy the compressed uimage(but without the 64k
> > header i.e zImage only).After this the process is the same as zimage as
> > there is no 64k header.Can you also confirm this.
>
> All mkimage does it put a 64k wrapper header on zImage... Nothing
> more, nothing less..
shouldn't that be just "64-byte wrapper"?
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
