I will take it under consideration. Now is no the time to be changing PCBs. Maybe I can consider this in the November time frame once things settle down. You are the only person to ask for this change so I am not sure making a change and the expense for a couple of boards makes any sense. It is a bad precedent to set.
Gerald On Thu, May 1, 2014 at 10:06 AM, Robert Nelson <[email protected]>wrote: > > On May 1, 2014 8:01 AM, "Dennis Cote" <[email protected]> wrote: > > > > On Thursday, May 1, 2014 8:35:55 AM UTC-6, Gerald wrote: > >> > >> I have no plans to make any changes to the board. Only change for Rev C > was to populate the 4G eMMC. The idea of scrapping 80,000 is definitely a > cost issue. > >> > > > > I would never suggest scrapping that many boards. If you already have > boards then by all means use them. > > > > I was suggesting a change before your next order. When you are ordering > PCBs in 100K quantities, the NRE charges for a PCB revision get spread > pretty thin. > > > >> > >> The requirement for the BBB was to be compatible with the BeagleBone. > >> > > > > If you add optional features to the BBB it is still compatible with the > Beaglebone. > > > > The software would have to be changed to activate the RTS/CTS > handshaking if this new feature is desired. Otherwise these lines would > still effectively be ignored and operate just as they do now, where they > are not connected. > > If you need something changed, you can always take the files and build > your own. Everything is available. > > > > > Dennis Cote > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
