Hi Robert,
Thank you very much.
I was lazy not to notice that....
It now seems better (less errors on boot), but still fails with same error:
insmod: error inserting 'g_ether.ko': -1 No such device
Can you give me another hint what might cause such failure?
This is the boot log:
Last login: Thu Jan 12 12:31:58 GMT 2012 on ttyO2
root@beagleboard:~#
root@beagleboard:~#
root@beagleboard:~#
root@beagleboard:~# modprobe g_ether
[ 30.667053] g_ether: disagrees about version of symbol module_layout
FATAL: Error inserting g_ether
(/lib/modules/2.6.37/kernel/drivers/usb/gadget/g_ether.ko): Invalid module
format
root@beagleboard:~# d
Texas Instruments X-Loader 1.5.0 (Jun 14 2011 - 22:04:07)
Beagle Rev C5
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2009.06-rc2 (Jan 15 2015 - 11:12:37)
, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
DRAM: 256 MB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Board revision Ax/Bx
Die ID #74aa000700000000015a676401014023
Hit any key to stop autoboot: 0
mmc1 is available
reading uImage
2918324 bytes read
## Booting kernel from Legacy Image at 80300000 ...
Image Name: Linux-2.6.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2918260 Bytes = 2.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.37 (ubuntu@ubuntu-laptop) (gcc version
4.3.3 (Sourcery G++ Lite 2009q1-203) ) #7 Thu Jan 15 18:09:40 IST 2015
[ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7),
cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing
instruction cache
[ 0.000000] Machine: OMAP3 Beagle Board
[ 0.000000] Reserving 4194304 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES3.1.2 (l2cache iva sgx neon isp 720mhz )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 64000
[ 0.000000] Kernel command line: console=ttyO2,115200n8
root=/dev/mmcblk0p2 rw rootwait
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 252MB = 252MB total
[ 0.000000] Memory: 242740k/242740k available, 19404k reserved, 0K
highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc003a000 ( 200 kB)
[ 0.000000] .text : 0xc003a000 - 0xc0568f4c (5308 kB)
[ 0.000000] .data : 0xc056a000 - 0xc071f1a0 (1749 kB)
[ 0.000000] NR_IRQS:409
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[ 0.000000] omap_hwmod: i2c1: softreset failed (waited 10000 usec)
[ 0.000000] omap_hwmod: i2c2: softreset failed (waited 10000 usec)
[ 0.000000] omap_hwmod: i2c3: softreset failed (waited 10000 usec)
[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96
interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] GPMC revision 5.0
[ 0.000000] Trying to install interrupt handler for IRQ402
[ 0.000000] Trying to install interrupt handler for IRQ403
[ 0.000000] Trying to install interrupt handler for IRQ404
[ 0.000000] Trying to install interrupt handler for IRQ405
[ 0.000000] Trying to install interrupt handler for IRQ406
[ 0.000000] Trying to install interrupt handler for IRQ407
[ 0.000000] Trying to install interrupt handler for IRQ408
[ 0.000000] Trying to install type control for IRQ409
[ 0.000000] Trying to set irq flags for IRQ409
[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3951 kB
[ 0.000000] per task-struct memory footprint: 2304 bytes
[ 0.000000] Calibrating delay loop... 456.86 BogoMIPS (lpj=1781760)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Security Framework initialized
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] devtmpfs: initialized
[ 0.000000] regulator: core version 0.5
[ 0.000000] regulator: dummy:
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.000000] OMAP3 Beagle Rev: C4
[ 0.000000] Found NAND on CS0
[ 0.000000] Registering NAND on CS0
[ 0.000000] Unable to get DVI reset GPIO
[ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.000000] OMAP DMA hardware revision 4.0
[ 0.122314] bio: create slab <bio-0> at 0
[ 0.133697] SCSI subsystem initialized
[ 0.147491] usbcore: registered new interface driver usbfs
[ 0.149322] usbcore: registered new interface driver hub
[ 0.150878] usbcore: registered new device driver usb
[ 0.157501] omap_device: omap_i2c.1: new worst case activate latency 0:
30517
[ 0.157684] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
[ 0.172485] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.172729] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.175842] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.192443] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.196044] regulator: VDAC: 1800 mV normal standby
[ 0.199615] regulator: VDVI: 1800 mV normal standby
[ 0.203613] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
[ 0.207763] regulator: VAUX3: 1800 mV normal standby
[ 0.211334] regulator: VAUX4: 1800 mV normal standby
[ 0.211914] omap_device: omap_i2c.1: new worst case deactivate latency
0: 61035
[ 0.221954] omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz
[ 0.236083] omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz
[ 0.246398] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.251586] Switching to clocksource 32k_counter
[ 0.440246] musb-hdrc: version 6.0, peripheral, debug=0
[ 0.440673] musb-hdrc musb-hdrc.0: degrade from otg to peripheral-only
mode
[ 0.440795] musb-hdrc musb-hdrc.0: dma type: dma-inventra
[ 0.440826] HS USB OTG: no transceiver configured
[ 0.440856] musb-hdrc musb-hdrc.0: musb_init_controller failed with
status -19
[ 0.442718] NET: Registered protocol family 2
[ 0.443664] IP route cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.446136] TCP established hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.446746] TCP bind hash table entries: 8192 (order: 6, 360448 bytes)
[ 0.452423] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.452545] TCP reno registered
[ 0.452606] UDP hash table entries: 128 (order: 1, 12288 bytes)
[ 0.453033] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes)
[ 0.454437] NET: Registered protocol family 1
[ 0.456481] RPC: Registered udp transport module.
[ 0.456512] RPC: Registered tcp transport module.
[ 0.456542] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.457855] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.461059] platform iva.0: Enabled OPP corresponding to 720MHz
[ 0.465179] omap-iommu omap-iommu.0: isp registered
[ 0.466308] OMAP35x Linux PSP version 04.02.00.07 (OMAP3BEAGLE)
[ 0.654205] VFS: Disk quotas dquot_6.5.2
[ 0.654388] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.657714] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat,
Inc.
[ 0.659271] msgmni has been set to 474
[ 0.665100] io scheduler noop registered
[ 0.665191] io scheduler deadline registered
[ 0.665435] io scheduler cfq registered (default)
[ 0.728576] OMAP DSS rev 2.0
[ 0.729248] OMAP DISPC rev 3.0
[ 0.729431] OMAP VENC rev 2
[ 0.730957] OMAP DSI rev 1.0
[ 1.060791] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.073242] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP
UART0
[ 1.076141] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP
UART1
[ 1.078155] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP
UART2
[ 1.821472] console [ttyO2] enabled
[ 1.889343] brd: module loaded
[ 1.923370] loop: module loaded
[ 1.935363] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.942352] omap2-nand driver initializing
[ 1.947479] ONFI flash detected
[ 1.951019] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron )
[ 1.958160] Creating 5 MTD partitions on "omap2-nand.0":
[ 1.963836] 0x000000000000-0x000000080000 : "X-Loader"
[ 1.982055] 0x000000080000-0x000000260000 : "U-Boot"
[ 1.997100] 0x000000260000-0x000000280000 : "U-Boot Env"
[ 2.011535] 0x000000280000-0x000000680000 : "Kernel"
[ 2.027618] 0x000000680000-0x000020000000 : "File System"
[ 2.298248] OneNAND driver initializing
[ 2.315246] mice: PS/2 mouse device common for all mice
[ 2.324920] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 2.343780] omap_device: omap_i2c.1: new worst case activate latency 0:
91552
[ 2.352966] input: twl4030_pwrbutton as
/devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[ 2.372009] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.379119] twl_rtc twl_rtc: Power up reset detected.
[ 2.385589] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 2.393066] i2c /dev entries driver
[ 2.405456] Linux media interface: v0.10
[ 2.410736] Linux video capture interface: v2.00
[ 2.418273] omap3isp supply VDD_CSIPHY1 not found, using dummy regulator
[ 2.425506] omap3isp supply VDD_CSIPHY2 not found, using dummy regulator
[ 2.433227] omap3isp omap3isp: Revision 2.0 found
[ 2.438476] omap-iommu omap-iommu.0: isp: version 1.1
[ 2.559204] omap_i2c omap_i2c.2: Arbitration lost
[ 2.580078] mt9v113 2-003c: chip id mismatch read 0x0, expecting 0x2280
[ 2.597198] isp_register_subdev_group: Unable to register subdev mt9v113
[ 2.605865] omap_device: omap_wdt.-1: new worst case activate latency 0:
30517
[ 2.616241] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 2.622711] omap_device: omap_wdt.-1: new worst case deactivate latency
0: 30517
[ 2.632354] twl4030_wdt twl4030_wdt: Failed to register misc device
[ 2.639099] twl4030_wdt: probe of twl4030_wdt failed with error -16
[ 2.668334] usbcore: registered new interface driver usbhid
[ 2.674285] usbhid: USB HID core driver
[ 2.686126] ALSA device list:
[ 2.689392] No soundcards found.
[ 2.692962] oprofile: hardware counters not available
[ 2.698333] oprofile: using timer interrupt.
[ 2.703430] TCP cubic registered
[ 2.706939] Initializing XFRM netlink socket
[ 2.711639] NET: Registered protocol family 17
[ 2.716613] NET: Registered protocol family 15
[ 2.722045] Registering the dns_resolver key type
[ 2.727783] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 1
[ 2.737945] ThumbEE CPU extension supported.
[ 2.764984] Power Management for TI OMAP3.
[ 2.770355] sr_init: No PMIC hook to init smartreflex
[ 2.776336] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver
initialized
[ 2.785644] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver
initialized
[ 2.795776] SmartReflex Class3 initialized
[ 2.863677] clock: disabling unused clocks to save power
[ 2.872497] platform iva.0: omap_voltage_scale: Already at the
requestedrate 360000000
[ 2.880920] platform mpu.0: omap_voltage_scale: Already at the
requestedrate 500000000
[ 2.889343] platform l3_main.0: omap_voltage_scale: Already at the
requestedrate 166000000
[ 2.931488] omap_device: omap_i2c.1: new worst case deactivate latency
0: 122070
[ 2.940246] regulator_init_complete: incomplete constraints, leaving
VDAC on
[ 2.952911] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00
UTC (946684800)
[ 2.962005] omap_vout omap_vout: Buffer Size = 3686400
[ 2.971313] omap_vout omap_vout: : registered and initialized video
device 15
[ 2.978973] omap_vout omap_vout: Buffer Size = 3686400
[ 2.987640] omap_vout omap_vout: : registered and initialized video
device 16
[ 3.002319] Waiting for root device /dev/mmcblk0p2...
[ 3.166046] mmc0: new high speed SDHC card at address aaaa
[ 3.175537] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
[ 3.200164] mmcblk0: p1 p2
[ 3.232910] EXT3-fs: barriers not enabled
[ 3.312805] kjournald starting. Commit interval 5 seconds
[ 3.319183] EXT3-fs (mmcblk0p2): warning: maximal mount count reached,
running e2fsck is recommended
[ 3.333465] EXT3-fs (mmcblk0p2): using internal journal
[ 3.339080] EXT3-fs (mmcblk0p2): recovery complete
[ 3.347442] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data
mode
[ 3.355468] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 3.362091] Freeing init memory: 200K
Failed to open /dev/kmsg for logging: No such file or directory
[ 3.685821] <30>systemd[1]: systemd 37 running in system mode. (+PAM
+LIBWRAP -AUDIT -SELINUX +SYSVINIT -LIBCRYPTSETUP; angstrom)
Welcome to The ֵngstrצm Distribution!
[ 3.784942] <28>systemd[1]: /sbin/modprobe failed with error code 1.
[ 3.796173] <30>systemd[1]: Set hostname to <beagleboard>.
[ 4.271270] <27>systemd[1]: Failed to open /dev/autofs: No such file or
directory
[ 4.279388] <27>systemd[1]: Failed to initialize automounter: No such
file or directory
[ 4.288024] <29>systemd[1]: Unit proc-sys-fs-binfmt_misc.automount
entered failed state.
Starting Runtime Directory...
Starting Remount API VFS...
Starting Lock Directory...
Starting Media Directory...
Started Apply Kernel Variables [
OK ]
Started Huge Pages File System [
OK ]
Starting POSIX Message Queue File System...
Starting File System Check on Root Device...
Started Load Kernel Modules [
OK ]
Started Configuration File System [
OK ]
Started FUSE Control File System [
OK ]
Started Set Up Additional Binary Formats [
OK ]
[ 4.773223] <30>systemd-fsck[591]: Root directory is writable, skipping
check.
Starting Debug File System...
Started Security File System [
OK ]
Starting Syslog Kernel Log Buffer Bridge...
Started Syslog Kernel Log Buffer Bridge [
OK ]
Starting udev Coldplug all Devices...
Starting udev Kernel Device Manager...
Started Runtime Directory [
OK ]
Started Remount API VFS [
OK ]
Started Lock Directory [
OK ]
[ 5.108489] <30>udevd[599]: starting version 175
Started udev Kernel Device Manager [
OK ]
Started Media Directory [
OK ]
Started POSIX Message Queue File System [
OK ]
Started File System Check on Root Device [
OK ]
Started Debug File System [
OK ]
Starting Remount Root FS...
Starting STDOUT Syslog Bridge...
Started STDOUT Syslog Bridge [
OK ]
Started Remount Root FS [
OK ]
Started Opkg first boot configure [
OK ]
Starting /tmp...
Started Machine ID first boot configure [
OK ]
Started /tmp [
OK ]
Starting Load Random Seed...
Starting Recreate Volatile Files and Directories...
Started Load Random Seed [
OK ]
Started Recreate Volatile Files and Directories [
OK ]
Starting Console System Startup Logging...
Starting xinetd.service...
Started Angstrom LED config [
OK ]
Starting Timestamping service...
Started Timestamping service [
OK ]
Starting Network Manager...
Started SSH Key Generation [
OK ]
Starting System Logging Service...
Starting Permit User Sessions...
Starting Login Service...
Starting Avahi mDNS/DNS-SD Stack...
Starting Periodic Command Scheduler...
Started Periodic Command Scheduler [
OK ]
Starting internet superserver: xinetdStarting D-Bus System Message Bus...
Starting Disk Manager...
[ 7.560455] <27>systemd-logind[694]: Failed to open
/sys/class/tty/tty0/active: No such file or directory
[ 7.666564] <27>systemd-logind[694]: Failed to fully start up daemon: No
such file or directory
Started Console System Startup Logging [
OK ]
Started Permit User Sessions [
OK ]
[ 7.854370] <75>/usr/sbin/crond[699]: (CRON) INFO (Syslog will be used
instead of sendmail.): No such file or directory
[ 7.894531] <29>systemd[1]: systemd-logind.service: main process exited,
code=exited, status=1
.
Failed to start Login Service
[FAILED]
See 'systemctl status systemd-logind.service' for details.
[ 8.455841] <29>systemd[1]: Unit systemd-logind.service entered failed
state.
[ 8.494506] <30>avahi-daemon[697]: Found user 'avahi' (UID 998) and
group 'avahi' (GID 996).
[ 8.679992] <30>avahi-daemon[697]: Successfully dropped root privileges.
Started xinetd.service [
OK ]
[ 8.894592] <30>avahi-daemon[697]: avahi-daemon 0.6.30 starting up.
[ 9.134979] <26>xinetd[760]: 760 {init_services} no services. Exiting...
[ 9.816589] <30>NetworkManager[691]: NetworkManager[691]: <info>
NetworkManager (version 0.9.2.0) is starting...
[ 10.004302] <30>udisks-daemon[706]: (process:706): GLib-WARNING **:
goption.c:2168: ignoring no-arg, optional-arg or filename flags (16) on
option of type 1
[ 10.050476] <14>NetworkManager[691]: <info> NetworkManager (version
0.9.2.0) is starting...
Started D-Bus System Message Bus [[
10.257171] <30> OK ]
NetworkManager[691]: NetworkManager[691]: <info> Read config file (null)
[ 10.347076] <14>NetworkManager[691]: <info> Read config file (null)
[ 10.489959] <30>load-timestamp.sh[689]: Update systemtime from
/etc/timestamp
[ 11.215545] <30>load-timestamp.sh[689]: Thu Jan 12 12:19:00 UTC 2012
[ 12.624359] <27>systemd-uaccess[1042]: Failed to apply ACL on
/dev/v4l-subdev1: Operation not supported
[ 12.851226] <27>systemd-uaccess[1038]: Failed to apply ACL on
/dev/video8: Operation not supported
[ 13.136016] <27>systemd-uaccess[1049]: Failed to apply ACL on
/dev/v4l-subdev2: Operation not supported
[ 13.214752] <27>systemd-uaccess[1058]: Failed to apply ACL on
/dev/v4l-subdev4: Operation not supported
[ 13.260223] <27>systemd-uaccess[1055]: Failed to apply ACL on
/dev/v4l-subdev3: Operation not supported
[ 13.492065] <27>systemd-uaccess[1046]: Failed to apply ACL on
/dev/v4l-subdev5: Operation not supported
Stopping Syslog Kernel Log Buffer Bridge...
[ 13.678131] <27>systemd-uaccess[1052]: Failed to apply ACL on
/dev/video7: Operation not supported
[ 13.703338] <27>systemd-uaccess[1048]: Failed to apply ACL on
/dev/v4l-subdev0: Operation not supported
Started Disk Manager [
13.740722] <27> [systemd-uaccess OK ]
[1063]: Failed to apply ACL on /dev/v4l-subdev6: Operation not supported
[ 13.777557] <27>systemd-uaccess[1053]: Failed to apply ACL on
/dev/v4l-subdev7: Operation not supported
Started Avahi mDNS/DNS-SD Stack [
OK ]
[ 14.085876] <27>systemd-uaccess[1078]: Failed to apply ACL on
/dev/video0: Operation not supported
Started udev Coldplug all Devices [
OK ]
[ 14.167053] <30>udisks-daemon[706]: (udisks-daemon:706):
udisks-daemon-DEBUG: Starting daemon version 1.0.4
[ 14.534271] <30>avahi-daemon[697]: Successfully called chroot().
[ 14.663299] <30>avahi-daemon[697]: Successfully dropped remaining
capabilities.
[ 14.978546] <30>avahi-daemon[697]: Loading service file
/services/sftp-ssh.service.
Starting Serial Getty on ttyO2...
[ 15.208068] <27>systemd-uaccess[1097]: Failed to apply ACL on
/dev/video2: Operation not supported
Started Serial Getty on ttyO2 [
OK ]
[ 15.409545] <30>avahi-daemon[697]: Loading service file
/services/ssh.service.
[ 15.569976] <27>systemd-uaccess[1098]: Failed to apply ACL on
/dev/video1: Operation not supported
[ 15.825408] <27>systemd-uaccess[1108]: Failed to apply ACL on
/dev/video4: Operation not supported
[ 16.087921] <27>systemd-uaccess[1102]: Failed to apply ACL on
/dev/video3: Operation not supported
[ 16.269470] <27>systemd-uaccess[1111]: Failed to apply ACL on
/dev/video6: Operation not supported
[ 16.396118] <27>systemd-uaccess[1121]: Failed to apply ACL on
/dev/video5: Operation not supported
[ 16.486480] <30>dbus-daemon[884]: dbus[884]: [system] Activating service
name='org.freedesktop.PolicyKit1' (using servicehelper)
[ 16.619537] <30>avahi-daemon[697]: Loading service file
/services/udisks.service.
Starting Getty on tty1...
[ 16.708282] <29>dbus[884]: [system] Activating
service name='org.freedesktop.PolicyKit1' (using servicehelper)
[ 16.806762] <30>avahi-daemon[697]: Network interface enumeration
completed.
Started Getty on tty1 [
OK ]
[ 16.857177] <30>avahi-daemon[697]: Registering HINFO record with
values 'ARMV7L'/'LINUX'.
[ 16.955200] <30>avahi-daemon[697]: Server startup complete. Host name is
beagleboard.local. Local service cookie is 2019548482.
[ 17.041137] <30>avahi-daemon[697]: Service "beagleboard"
(/services/udisks.service) successfully established.
Starting Gnome Display Manager..[ 17.128417] <30>.
avahi-daemon[697]:
Service "beagleboard" (/services/ssh.service) successfully established.
[ 17.171539] <30>avahi-daemon[697]: Service "beagleboard"
(/services/sftp-ssh.service) successfully established.
Started Gnome Display Manager [
OK ]
[ 17.265960] <27>systemd-uaccess[1200]: Failed to apply ACL on
/dev/snd/timer: Operation not supported
Stopped Syslog Kernel Log Buffer Bridge [
OK ]
.---O---.
| | .Started System Logging Service
[ OK ]
-. o o
| | |-----.-----.-----.| | .----..-----.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- || --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
-' |
'---'
The Angstrom Distribution beagleboard ttyO2
Angstrom v2012.01-core - Kernel 2.6.37
beagleboard login: Started Network Manager
[ OK ]
root
Last login: Thu Jan 12 12:19:07 GMT 2012 on ttyO2
root@beagleboard:~# modprobe g_ether
FATAL: Error inserting g_ether
(/lib/modules/2.6.37/kernel/drivers/usb/gadget/g_ether.ko): No such device
root@beagleboard:~# cd /
root@beagleboard:/# find . | grep "g_ether"
./lib/modules/3.0.14+/kernel/drivers/usb/gadget/g_ether.ko
./lib/modules/2.6.37/kernel/drivers/usb/gadget/g_ether.ko
^C
root@beagleboard:/# cd /lib/modules/2.6.37/kernel/drivers/
media/ scsi/ usb/ video/
root@beagleboard:/# cd /lib/modules/2.6.37/kernel/drivers/usb/gadget/g_
-sh: cd: /lib/modules/2.6.37/kernel/drivers/usb/gadget/g_: No such file or
directory
root@beagleboard:/# cd /lib/modules/2.6.37/kernel/drivers/usb/gadget/
root@beagleboard:/lib/modules/2.6.37/kernel/drivers/usb/gadget# insmod
g_ether.ko
insmod: error inserting 'g_ether.ko': -1 No such device
root@beagleboard:/lib/modules/2.6.37/kernel/drivers/usb/gadget# rmmod
g_ether
ERROR: Module g_ether does not exist in /proc/modules
root@beagleboard:/lib/modules/2.6.37/kernel/drivers/usb/gadget# insmod
g_ether.ko
insmod: error inserting 'g_ether.ko': -1 No such device
root@beagleboard:/lib/modules/2.6.37/kernel/drivers/usb/gadget#
Thanks, Ran
On Thu, Jan 15, 2015 at 5:42 PM, Robert Nelson <[email protected]>
wrote:
> On Thu, Jan 15, 2015 at 9:39 AM, Ran Shalit <[email protected]> wrote:
> >
> >
> > Hi Robert,
> >
> > Thanks for the hint,
> > But I re-check the config and it seems that all relevant USB flags are
> > configured correctly:
> >
> > CONFIG_V4L_USB_DRIVERS=y
> > CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
> > CONFIG_USB_GSPCA=m
> > CONFIG_SND_USB=y
> > CONFIG_USB_HID=y
> > CONFIG_USB_SUPPORT=y
> > CONFIG_USB_ARCH_HAS_HCD=y
> > CONFIG_USB_ARCH_HAS_OHCI=y
> > CONFIG_USB_ARCH_HAS_EHCI=y
> > CONFIG_USB=y
> > CONFIG_USB_DEVICE_CLASS=y
> > CONFIG_USB_MUSB_HDRC=y
> > CONFIG_USB_MUSB_OMAP2PLUS_GLUE=y
> > CONFIG_USB_MUSB_OMAP2PLUS=y
> > CONFIG_USB_MUSB_PERIPHERAL=y
> > CONFIG_USB_GADGET_MUSB_HDRC=y
> > CONFIG_USB_INVENTRA_DMA_HW=y
> > CONFIG_USB_INVENTRA_DMA=y
> > CONFIG_MUSB_USE_SYSTEM_DMA_WORKAROUND=y
> > CONFIG_USB_MUSB_DEBUG=y
> > CONFIG_USB_GADGET=y
> > CONFIG_USB_GADGET_VBUS_DRAW=2
> > CONFIG_USB_GADGET_SELECTED=y
> > CONFIG_USB_GADGET_DUALSPEED=y
> > CONFIG_USB_ETH=m
> > CONFIG_USB_ETH_RNDIS=y
> > CONFIG_USB_FILE_STORAGE=m
> > CONFIG_USB_OTG_UTILS=y
> >
> > Do you find anything missing ?
>
> [ 3.843353] <28>systemd[1]: CONFIG_CGROUPS was not set when your
> kernel was compiled. Systems without control groups are not supported.
> We will now sleep for 10s, and then continue boot-up. Expect breakage
> and please do not file bugs. Instead fix your kernel and enable
> CONFIG_CGROUPS.
>
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/RznTdyaz2gg/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
