Hi Robert,
Thanks,
I have compiled both modules and kernel, but still some error, without any
information.....
root@beagleboard:/lib/modules/2.6.37/kernel/drivers/usb/gadget# insmod
g_ether.ko
insmod: error inserting 'g_ether.ko': -1 No such device
The new boot log is below.
Is there any idea why it fails ?
Texas Instruments X-Loader 1.5.0 (Jun 14 2011 - 22:04:07)
Beagle Rev C5
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2009.06-rc2 (Jan 15 2015 - 11:12:37)
, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
DRAM: 256 MB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Board revision Ax/Bx
Die ID #74aa000700000000015a676401014023
Hit any key to stop autoboot: 0
mmc1 is available
reading uImage
2927348 bytes read
## Booting kernel from Legacy Image at 80300000 ...
Image Name: Linux-2.6.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2927284 Bytes = 2.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.37 (ubuntu@ubuntu-laptop) (gcc version
4.3.3 (Sourcery G++ Lite 2009q1-203) ) #8 Thu Jan 15 18:29:23 IST 2015
[ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7),
cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing
instruction cache
[ 0.000000] Machine: OMAP3 Beagle Board
[ 0.000000] Reserving 4194304 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES3.1.2 (l2cache iva sgx neon isp 720mhz )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 64000
[ 0.000000] Kernel command line: console=ttyO2,115200n8
root=/dev/mmcblk0p2 rw rootwait
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 252MB = 252MB total
[ 0.000000] Memory: 242712k/242712k available, 19432k reserved, 0K
highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc003a000 ( 200 kB)
[ 0.000000] .text : 0xc003a000 - 0xc056e0d0 (5329 kB)
[ 0.000000] .data : 0xc0570000 - 0xc0725220 (1749 kB)
[ 0.000000] NR_IRQS:409
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[ 0.000000] omap_hwmod: i2c1: softreset failed (waited 10000 usec)
[ 0.000000] omap_hwmod: i2c2: softreset failed (waited 10000 usec)
[ 0.000000] omap_hwmod: i2c3: softreset failed (waited 10000 usec)
[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96
interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] GPMC revision 5.0
[ 0.000000] Trying to install interrupt handler for IRQ402
[ 0.000000] Trying to install interrupt handler for IRQ403
[ 0.000000] Trying to install interrupt handler for IRQ404
[ 0.000000] Trying to install interrupt handler for IRQ405
[ 0.000000] Trying to install interrupt handler for IRQ406
[ 0.000000] Trying to install interrupt handler for IRQ407
[ 0.000000] Trying to install interrupt handler for IRQ408
[ 0.000000] Trying to install type control for IRQ409
[ 0.000000] Trying to set irq flags for IRQ409
[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3951 kB
[ 0.000000] per task-struct memory footprint: 2304 bytes
[ 0.000000] Calibrating delay loop... 458.96 BogoMIPS (lpj=1789952)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Security Framework initialized
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] devtmpfs: initialized
[ 0.000000] regulator: core version 0.5
[ 0.000000] regulator: dummy:
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.000000] OMAP3 Beagle Rev: C4
[ 0.000000] Found NAND on CS0
[ 0.000000] Registering NAND on CS0
[ 0.000000] Unable to get DVI reset GPIO
[ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.000000] OMAP DMA hardware revision 4.0
[ 0.123657] bio: create slab <bio-0> at 0
[ 0.135101] SCSI subsystem initialized
[ 0.149047] usbcore: registered new interface driver usbfs
[ 0.151000] usbcore: registered new interface driver hub
[ 0.152465] usbcore: registered new device driver usb
[ 0.159149] omap_device: omap_i2c.1: new worst case activate latency 0:
61035
[ 0.159362] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
[ 0.174316] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.174560] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.177703] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.194580] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.198181] regulator: VDAC: 1800 mV normal standby
[ 0.201873] regulator: VDVI: 1800 mV normal standby
[ 0.205810] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
[ 0.210021] regulator: VAUX3: 1800 mV normal standby
[ 0.213623] regulator: VAUX4: 1800 mV normal standby
[ 0.214294] omap_device: omap_i2c.1: new worst case deactivate latency
0: 91552
[ 0.214691] omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz
[ 0.229003] omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz
[ 0.239440] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.244750] Switching to clocksource 32k_counter
[ 0.435150] musb-hdrc: version 6.0, peripheral, debug=0
[ 0.435577] musb-hdrc musb-hdrc.0: degrade from otg to peripheral-only
mode
[ 0.435668] musb-hdrc musb-hdrc.0: dma type: dma-inventra
[ 0.435699] HS USB OTG: no transceiver configured
[ 0.435729] musb-hdrc musb-hdrc.0: musb_init_controller failed with
status -19
[ 0.437591] NET: Registered protocol family 2
[ 0.438537] IP route cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.441192] TCP established hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.441772] TCP bind hash table entries: 8192 (order: 6, 360448 bytes)
[ 0.447326] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.447509] TCP reno registered
[ 0.447540] UDP hash table entries: 128 (order: 1, 12288 bytes)
[ 0.448059] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes)
[ 0.449432] NET: Registered protocol family 1
[ 0.451385] RPC: Registered udp transport module.
[ 0.451416] RPC: Registered tcp transport module.
[ 0.451416] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.452758] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.456146] platform iva.0: Enabled OPP corresponding to 720MHz
[ 0.460144] omap-iommu omap-iommu.0: isp registered
[ 0.461303] OMAP35x Linux PSP version 04.02.00.07 (OMAP3BEAGLE)
[ 0.649597] VFS: Disk quotas dquot_6.5.2
[ 0.649780] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.653320] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat,
Inc.
[ 0.657958] msgmni has been set to 474
[ 0.663879] io scheduler noop registered
[ 0.663909] io scheduler deadline registered
[ 0.664184] io scheduler cfq registered (default)
[ 0.729553] OMAP DSS rev 2.0
[ 0.730224] OMAP DISPC rev 3.0
[ 0.730407] OMAP VENC rev 2
[ 0.731964] OMAP DSI rev 1.0
[ 1.061706] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.074340] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP
UART0
[ 1.077087] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP
UART1
[ 1.079193] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP
UART2
[ 1.822540] console [ttyO2] enabled
[ 1.891143] brd: module loaded
[ 1.925689] loop: module loaded
[ 1.937622] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.944610] omap2-nand driver initializing
[ 1.949676] ONFI flash detected
[ 1.953247] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron )
[ 1.960388] Creating 5 MTD partitions on "omap2-nand.0":
[ 1.966064] 0x000000000000-0x000000080000 : "X-Loader"
[ 1.984436] 0x000000080000-0x000000260000 : "U-Boot"
[ 1.999542] 0x000000260000-0x000000280000 : "U-Boot Env"
[ 2.014068] 0x000000280000-0x000000680000 : "Kernel"
[ 2.030242] 0x000000680000-0x000020000000 : "File System"
[ 2.301544] OneNAND driver initializing
[ 2.317413] mice: PS/2 mouse device common for all mice
[ 2.327362] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 2.345733] omap_device: omap_i2c.1: new worst case activate latency 0:
122070
[ 2.355102] input: twl4030_pwrbutton as
/devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[ 2.374267] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.381378] twl_rtc twl_rtc: Power up reset detected.
[ 2.387847] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 2.395385] i2c /dev entries driver
[ 2.407806] Linux media interface: v0.10
[ 2.413055] Linux video capture interface: v2.00
[ 2.420562] omap3isp supply VDD_CSIPHY1 not found, using dummy regulator
[ 2.427795] omap3isp supply VDD_CSIPHY2 not found, using dummy regulator
[ 2.435546] omap3isp omap3isp: Revision 2.0 found
[ 2.440887] omap-iommu omap-iommu.0: isp: version 1.1
[ 2.552551] omap_i2c omap_i2c.2: Arbitration lost
[ 2.573242] mt9v113 2-003c: chip id mismatch read 0x0, expecting 0x2280
[ 2.590240] isp_register_subdev_group: Unable to register subdev mt9v113
[ 2.598937] omap_device: omap_wdt.-1: new worst case activate latency 0:
30517
[ 2.609344] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 2.615814] omap_device: omap_wdt.-1: new worst case deactivate latency
0: 30517
[ 2.625457] twl4030_wdt twl4030_wdt: Failed to register misc device
[ 2.632202] twl4030_wdt: probe of twl4030_wdt failed with error -16
[ 2.661651] usbcore: registered new interface driver usbhid
[ 2.667602] usbhid: USB HID core driver
[ 2.679443] ALSA device list:
[ 2.682678] No soundcards found.
[ 2.686248] oprofile: hardware counters not available
[ 2.691619] oprofile: using timer interrupt.
[ 2.696716] TCP cubic registered
[ 2.700225] Initializing XFRM netlink socket
[ 2.704986] NET: Registered protocol family 17
[ 2.709930] NET: Registered protocol family 15
[ 2.715393] Registering the dns_resolver key type
[ 2.721282] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 1
[ 2.731414] ThumbEE CPU extension supported.
[ 2.758483] Power Management for TI OMAP3.
[ 2.763824] sr_init: No PMIC hook to init smartreflex
[ 2.769836] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver
initialized
[ 2.779174] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver
initialized
[ 2.789276] SmartReflex Class3 initialized
[ 2.857177] clock: disabling unused clocks to save power
[ 2.866088] platform iva.0: omap_voltage_scale: Already at the
requestedrate 360000000
[ 2.874511] platform mpu.0: omap_voltage_scale: Already at the
requestedrate 500000000
[ 2.882934] platform l3_main.0: omap_voltage_scale: Already at the
requestedrate 166000000
[ 2.927032] regulator_init_complete: incomplete constraints, leaving
VDAC on
[ 2.938446] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00
UTC (946684800)
[ 2.947753] omap_vout omap_vout: Buffer Size = 3686400
[ 2.957153] omap_vout omap_vout: : registered and initialized video
device 15
[ 2.964782] omap_vout omap_vout: Buffer Size = 3686400
[ 2.973541] omap_vout omap_vout: : registered and initialized video
device 16
[ 2.988342] Waiting for root device /dev/mmcblk0p2...
[ 3.141418] mmc0: new high speed SDHC card at address aaaa
[ 3.151336] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
[ 3.175750] mmcblk0: p1 p2
[ 3.218505] EXT3-fs: barriers not enabled
[ 3.227325] kjournald starting. Commit interval 5 seconds
[ 3.233612] EXT3-fs (mmcblk0p2): warning: maximal mount count reached,
running e2fsck is recommended
[ 3.247222] EXT3-fs (mmcblk0p2): using internal journal
[ 3.252807] EXT3-fs (mmcblk0p2): recovery complete
[ 3.258544] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data
mode
[ 3.266540] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 3.273132] Freeing init memory: 200K
Failed to open /dev/kmsg for logging: No such file or directory
[ 3.609405] <30>systemd[1]: systemd 37 running in system mode. (+PAM
+LIBWRAP -AUDIT -SELINUX +SYSVINIT -LIBCRYPTSETUP; angstrom)
Welcome to The ֵngstrצm Distribution!
[ 3.713439] <28>systemd[1]: /sbin/modprobe failed with error code 1.
[ 3.724670] <30>systemd[1]: Set hostname to <beagleboard>.
Starting Runtime Directory...
Starting Remount API VFS...
Starting Lock Directory...
Starting Media Directory...
Started Apply Kernel Variables [
OK ]
Started Huge Pages File System [
OK ]
Starting POSIX Message Queue File System...
Starting File System Check on Root Device...
Started Load Kernel Modules [
OK ]
Started Configuration File System [
OK ]
Started FUSE Control File System [
OK ]
Started Set Up Additional Binary Formats [
OK ]
[ 4.677764] <30>systemd-fsck[593]: Root directory is writable, skipping
check.
Starting Debug File System...
Started Security File System [
OK ]
Starting Syslog Kernel Log Buffer Bridge...
Started Syslog Kernel Log Buffer Bridge [
OK ]
Starting udev Coldplug all Devices...
Starting udev Kernel Device Manager...
Started Runtime Directory [
OK ]
Started Remount API VFS [
OK ]
Started Lock Directory [
OK ]
Started udev Ker[ 5.031005] <30>udevd[600]: starting version 175
nel Device Manager [ OK ]
Started Media Directory [
OK ]
Started POSIX Message Queue File System [
OK ]
Started File System Check on Root Device [
OK ]
Started Debug File System [
OK ]
Starting Remount Root FS...
Starting STDOUT Syslog Bridge...
Started STDOUT Syslog Bridge [
OK ]
Started Remount Root FS [
OK ]
Started Opkg first boot configure [
OK ]
Starting /tmp...
Started Machine ID first boot configure [
OK ]
Started /tmp [
OK ]
Starting Load Random Seed...
Starting Recreate Volatile Files and Directories...
Started Load Random Seed [
OK ]
Started Recreate Volatile Files and Directories [
OK ]
Starting Console System Startup Logging...
Starting xinetd.service...
Started Angstrom LED config [
OK ]
Starting Timestamping service...
Started Timestamping service [
OK ]
Starting Network Manager...
Started SSH Key Generation [
OK ]
Starting System Logging Service...
Starting Permit User Sessions...
Starting Login Service...
Starting Avahi mDNS/DNS-SD Stack...
Starting Periodic Command Scheduler...
Started Periodic Command Scheduler [
OK ]
Starting internet superserver: xinetdStarting D-Bus System Message Bus...
Starting Disk Manager...
Started Console System Startup Logging [
OK ]
[ 8.354309] <27>systemd-logind[707]: Failed to open
/sys/class/tty/tty0/active: No such file or directory
Started Permit User Sessions [
OK ]
[ 8.659515] <27>systemd-logind[707]: Failed to fully start up daemon: No
such file or directory
[ 8.877380] <29>systemd[1]: systemd-logind.service: main process exited,
code=exited, status=1
[ 9.057952] <75>/usr/sbin/crond[722]: (CRON) INFO (Syslog will be used
instead of sendmail.): No such file or directory
.
Failed to start Login Service
[FAILED]
[ 9.415985] <30>avahi-daemon[711]: Found user 'avahi' (UID 998) and
group 'avahi' (GID 996).
[ 9.478942] <30>avahi-daemon[711]: Successfully dropped root privileges.
See 'systemctl status systemd-logind.service' for details.
[ 9.517791] <29>systemd[1]: Unit systemd-logind.service entered failed
state.
[ 9.659942] <30>avahi-daemon[711]: avahi-daemon 0.6.30 starting up.
Started xinetd.service [
OK ]
[ 9.930999] <26>xinetd[868]: 868 {init_services} no services. Exiting...
Starting Serial Getty on ttyO2...
[ 10.786376] <30>NetworkManager[704]: NetworkManager[704]: <info>
NetworkManager (version 0.9.2.0) is starting...
Started Serial Getty on ttyO2 [
OK ]
[ 11.033538] <30>udisks-daemon[770]: (process:770): GLib-WARNING **:
goption.c:2168: ignoring no-arg, optional-arg or filename flags (16) on
option of type 1
[ 11.310058] <14>NetworkManager[704]: <info> NetworkManager (version
0.9.2.0) is starting...
Started D-Bus System Message Bus [
OK ]
[ 11.474243] <30>NetworkManager[704]: NetworkManager[704]: <info> Read
config file (null)
[ 11.721771] <14>NetworkManager[704]: <info> Read config file (null)
[ 11.728485] <30>load-timestamp.sh[702]: Update systemtime from
/etc/timestamp
[ 12.190551] <30>load-timestamp.sh[702]: Thu Jan 12 12:19:00 UTC 2012
[ 12.656372] <27>systemd-uaccess[1031]: Failed to apply ACL on
/dev/v4l-subdev3: Operation not supported
[ 12.891265] <27>systemd-uaccess[1027]: Failed to apply ACL on
/dev/v4l-subdev0: Operation not supported
.---O---. [ 13.117218]
<27>systemd-uaccess[1019]: Failed to apply ACL on /dev/v4l-subdev1:
Operation not supported
| | .-. o o
| | |-----.-----.-[ 13.337951] <27>systemd-uaccess[1033]: Failed to
apply ACL on /dev/v4l-subdev2: Operation not supported
----.| | .----..--[ 13.378295] <27>systemd-uaccess[1037]: Failed to
apply ACL on /dev/v4l-subdev6: Operation not supported
---.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- [ 13.526580] <27>systemd-uaccess[1040]: Failed
to apply ACL on /dev/v4l-subdev7: Operation not supported
|| --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
[ 13.677337] <27>systemd-uaccess[1028]: Failed to apply ACL on
/dev/v4l-subdev5: Operation not supported
-' |
'---'
The Angstrom Distribution beagleboard ttyO2
Angstrom v2012.01-co[ 13.979644] <27>systemd-uaccess[1042]: Failed to
apply ACL on /dev/v4l-subdev4: Operation not supported
re - Kernel 2.6.37
beagleboard login: [ 14.332580] <27>systemd-uaccess[1049]: Failed to
apply ACL on /dev/video0: Operation not supported
[ 14.667114] <27>systemd-uaccess[1051]: Failed to apply ACL on
/dev/video1: Operation not supported
[ 14.995208] <27>systemd-uaccess[1053]: Failed to apply ACL on
/dev/video3: Operation not supported
Started udev Coldplug all Devices [
OK ]
[ 15.218170] <27>systemd-uaccess[1055]: Failed to apply ACL on
/dev/video2: Operation not supported
[ 15.450988] <27>systemd-uaccess[1057]: Failed to apply ACL on
/dev/video4: Operation not supported
Started Disk Manager [
OK ]
Started Avahi mDNS/DNS-SD Stack
[[ 15.689880] <27> OK ]
systemd-uaccess[1063]: Failed to apply ACL on
/dev/video5: Operation not supported
[ 15.800720] <27>systemd-uaccess[1073]: Failed to apply ACL on
/dev/video8: Operation not supported
[ 16.030517] <27>systemd-uaccess[1072]: Failed to apply ACL on
/dev/video7: Operation not supported
[ 16.091583] <27>systemd-uaccess[1086]: Failed to apply ACL on
/dev/video6: Operation not supported
Stopping Syslog Kernel Log Buffer Bridge...
[ 16.201354]
<30>udisks-daemon[770]: (udisks-daemon:770): udisks-daemon-DEBUG: Starting
daemon version 1.0.4
[ 16.326660] <30>avahi-daemon[711]: Successfully called chroot().
[ 16.400512] <30>avahi-daemon[711]: Successfully dropped remaining
capabilities.
[ 16.473449] <30>avahi-daemon[711]: Loading service file
/services/sftp-ssh.service.
[ 16.510803] <30>avahi-daemon[711]: Loading service file
/services/ssh.service.
[ 16.565338] <30>avahi-daemon[711]: Loading service file
/services/udisks.service.
[ 16.644561] <30>avahi-daemon[711]: Network interface enumeration
completed.
[ 16.669464] <30>avahi-daemon[711]: Registering HINFO record with values
'ARMV7L'/'LINUX'.
[ 16.757904] <30>avahi-daemon[711]: Server startup complete. Host name is
beagleboard.local. Local service cookie is 441939348.
Starting Getty on tty1...
[ 16.862426] <30>avahi-daemon[711]: Service
"beagleboard" (/services/udisks.service) successfully established.
[ 16.971832] <30>dbus-daemon[969]: dbus[969]: [system] Activating service
name='org.freedesktop.PolicyKit1' (using servicehelper)
Started Getty on tty1 [
OK ]
[ 17.104522] <29>dbus[969]: [system] Activating service
name='org.freedesktop.PolicyKit1' (using servicehelper)
[ 17.218292] <30>avahi-daemon[711]: Service "beagleboard"
(/services/ssh.service) successfully established.
Starting Gnome D[ 17.271667] <27>isplay Manager..systemd-uaccess.
[1199]:
Failed to apply ACL on /dev/snd/timer: Operation not supported
[ 17.293273] <30>avahi-daemon[711]: Service "beagleboard"
(/services/sftp-ssh.service) successfully established.
Started Gnome Display Manager [
OK ]
Stopped Syslog Kernel Log Buffer Bridge
[ OK ]
Started System Logging Service
[ OK ]
Started Network Manager
[ OK ]
.---O---.
| | .-. o o
| | |-----.-----.-----.| | .----..-----.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- || --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
-' |
'---'
The Angstrom Distribution beagleboard ttyO2
Angstrom v2012.01-core - Kernel 2.6.37
beagleboard login:
.---O---.
| | .-. o o
| | |-----.-----.-----.| | .----..-----.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- || --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
-' |
'---'
The Angstrom Distribution beagleboard ttyO2
Angstrom v2012.01-core - Kernel 2.6.37
beagleboard login: root
Last login: Thu Jan 12 12:19:48 GMT 2012 on ttyO2
root@beagleboard:~#
root@beagleboard:~#
root@beagleboard:~# cd /lib/modules/2.6.37/kernel/drivers/usb/gadget/
root@beagleboard:/lib/modules/2.6.37/kernel/drivers/usb/gadget# insmod
g_ether.ko
insmod: error inserting 'g_ether.ko': -1 No such device
root@beagleboard:/lib/modules/2.6.37/kernel/drivers/usb/gadget
Regards,
Ran
On Thu, Jan 15, 2015 at 6:26 PM, Robert Nelson <[email protected]>
wrote:
> On Thu, Jan 15, 2015 at 10:23 AM, Ran Shalit <[email protected]> wrote:
> > Hi Robert,
> >
> > Thank you very much.
> > I was lazy not to notice that....
> > It now seems better (less errors on boot), but still fails with same
> error:
> > insmod: error inserting 'g_ether.ko': -1 No such device
> > Can you give me another hint what might cause such failure?
> >
> > This is the boot log:
> >
> > Last login: Thu Jan 12 12:31:58 GMT 2012 on ttyO2
> > root@beagleboard:~#
> > root@beagleboard:~#
> > root@beagleboard:~#
> > root@beagleboard:~# modprobe g_ether
> > [ 30.667053] g_ether: disagrees about version of symbol module_layout
> > FATAL: Error inserting g_ether
>
> This means your kernel was built seperatly from the modules..
>
> When you build your kernel, just also build 'make modules' and install
> them to the rootfs..
>
>
> > (/lib/modules/2.6.37/kernel/drivers/usb/gadget/g_ether.ko): Invalid
> module
> > format
> > root@beagleboard:~# d
> >
> > Texas Instruments X-Loader 1.5.0 (Jun 14 2011 - 22:04:07)
> > Beagle Rev C5
> > Reading boot sector
> > Loading u-boot.bin from mmc
> >
> >
> > U-Boot 2009.06-rc2 (Jan 15 2015 - 11:12:37)
> >
> > , CPU-OPP2 L3-165MHz
> > OMAP3 Beagle board + LPDDR/NAND
> > DRAM: 256 MB
> > NAND: 512 MiB
> > In: serial
> > Out: serial
> > Err: serial
> > Board revision Ax/Bx
> > Die ID #74aa000700000000015a676401014023
> > Hit any key to stop autoboot: 0
> > mmc1 is available
> > reading uImage
> >
> > 2918324 bytes read
> > ## Booting kernel from Legacy Image at 80300000 ...
> > Image Name: Linux-2.6.37
> > Image Type: ARM Linux Kernel Image (uncompressed)
> > Data Size: 2918260 Bytes = 2.8 MB
> > Load Address: 80008000
> > Entry Point: 80008000
> > Verifying Checksum ... OK
> > Loading Kernel Image ... OK
> > OK
> >
> > Starting kernel ...
> >
> > Uncompressing Linux... done, booting the kernel.
> > [ 0.000000] Linux version 2.6.37 (ubuntu@ubuntu-laptop) (gcc version
> > 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #7 Thu Jan 15 18:09:40 IST 2015
> > [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7),
> > cr=10c53c7f
> > [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing
> > instruction cache
> > [ 0.000000] Machine: OMAP3 Beagle Board
> > [ 0.000000] Reserving 4194304 bytes SDRAM for VRAM
> > [ 0.000000] Memory policy: ECC disabled, Data cache writeback
> > [ 0.000000] OMAP3430/3530 ES3.1.2 (l2cache iva sgx neon isp 720mhz )
> > [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total
> > pages: 64000
> > [ 0.000000] Kernel command line: console=ttyO2,115200n8
> > root=/dev/mmcblk0p2 rw rootwait
> > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
> > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
> > bytes)
> > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
> bytes)
> > [ 0.000000] Memory: 252MB = 252MB total
> > [ 0.000000] Memory: 242740k/242740k available, 19404k reserved, 0K
> > highmem
> > [ 0.000000] Virtual kernel memory layout:
> > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> > [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> > [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
> > [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
> > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
> > [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> > [ 0.000000] .init : 0xc0008000 - 0xc003a000 ( 200 kB)
> > [ 0.000000] .text : 0xc003a000 - 0xc0568f4c (5308 kB)
> > [ 0.000000] .data : 0xc056a000 - 0xc071f1a0 (1749 kB)
> > [ 0.000000] NR_IRQS:409
> > [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
> > [ 0.000000] omap_hwmod: i2c1: softreset failed (waited 10000 usec)
> > [ 0.000000] omap_hwmod: i2c2: softreset failed (waited 10000 usec)
> > [ 0.000000] omap_hwmod: i2c3: softreset failed (waited 10000 usec)
> > [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
> > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96
> > interrupts
> > [ 0.000000] Total of 96 interrupts on 1 active controller
> > [ 0.000000] GPMC revision 5.0
> > [ 0.000000] Trying to install interrupt handler for IRQ402
> > [ 0.000000] Trying to install interrupt handler for IRQ403
> > [ 0.000000] Trying to install interrupt handler for IRQ404
> > [ 0.000000] Trying to install interrupt handler for IRQ405
> > [ 0.000000] Trying to install interrupt handler for IRQ406
> > [ 0.000000] Trying to install interrupt handler for IRQ407
> > [ 0.000000] Trying to install interrupt handler for IRQ408
> > [ 0.000000] Trying to install type control for IRQ409
> > [ 0.000000] Trying to set irq flags for IRQ409
> > [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
> > [ 0.000000] Console: colour dummy device 80x30
> > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
> Inc.,
> > Ingo Molnar
> > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> > [ 0.000000] ... MAX_LOCK_DEPTH: 48
> > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> > [ 0.000000] ... CLASSHASH_SIZE: 4096
> > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> > [ 0.000000] ... CHAINHASH_SIZE: 16384
> > [ 0.000000] memory used by lock dependency info: 3951 kB
> > [ 0.000000] per task-struct memory footprint: 2304 bytes
> > [ 0.000000] Calibrating delay loop... 456.86 BogoMIPS (lpj=1781760)
> > [ 0.000000] pid_max: default: 32768 minimum: 301
> > [ 0.000000] Security Framework initialized
> > [ 0.000000] Mount-cache hash table entries: 512
> > [ 0.000000] CPU: Testing write buffer coherency: ok
> > [ 0.000000] devtmpfs: initialized
> > [ 0.000000] regulator: core version 0.5
> > [ 0.000000] regulator: dummy:
> > [ 0.000000] NET: Registered protocol family 16
> > [ 0.000000] OMAP GPIO hardware version 2.5
> > [ 0.000000] OMAP GPIO hardware version 2.5
> > [ 0.000000] OMAP GPIO hardware version 2.5
> > [ 0.000000] OMAP GPIO hardware version 2.5
> > [ 0.000000] OMAP GPIO hardware version 2.5
> > [ 0.000000] OMAP GPIO hardware version 2.5
> > [ 0.000000] omap_mux_init: Add partition: #1: core, flags: 0
> > [ 0.000000] OMAP3 Beagle Rev: C4
> > [ 0.000000] Found NAND on CS0
> > [ 0.000000] Registering NAND on CS0
> > [ 0.000000] Unable to get DVI reset GPIO
> > [ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported.
> > [ 0.000000] OMAP DMA hardware revision 4.0
> > [ 0.122314] bio: create slab <bio-0> at 0
> > [ 0.133697] SCSI subsystem initialized
> > [ 0.147491] usbcore: registered new interface driver usbfs
> > [ 0.149322] usbcore: registered new interface driver hub
> > [ 0.150878] usbcore: registered new device driver usb
> > [ 0.157501] omap_device: omap_i2c.1: new worst case activate latency
> 0:
> > 30517
> > [ 0.157684] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
> > [ 0.172485] twl4030: PIH (irq 7) chaining IRQs 368..375
> > [ 0.172729] twl4030: power (irq 373) chaining IRQs 376..383
> > [ 0.175842] twl4030: gpio (irq 368) chaining IRQs 384..401
> > [ 0.192443] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
> standby
> > [ 0.196044] regulator: VDAC: 1800 mV normal standby
> > [ 0.199615] regulator: VDVI: 1800 mV normal standby
> > [ 0.203613] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal
> standby
> > [ 0.207763] regulator: VAUX3: 1800 mV normal standby
> > [ 0.211334] regulator: VAUX4: 1800 mV normal standby
> > [ 0.211914] omap_device: omap_i2c.1: new worst case deactivate
> latency 0:
> > 61035
> > [ 0.221954] omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz
> > [ 0.236083] omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz
> > [ 0.246398] Advanced Linux Sound Architecture Driver Version 1.0.23.
> > [ 0.251586] Switching to clocksource 32k_counter
> > [ 0.440246] musb-hdrc: version 6.0, peripheral, debug=0
> > [ 0.440673] musb-hdrc musb-hdrc.0: degrade from otg to peripheral-only
> > mode
> > [ 0.440795] musb-hdrc musb-hdrc.0: dma type: dma-inventra
> > [ 0.440826] HS USB OTG: no transceiver configured
> > [ 0.440856] musb-hdrc musb-hdrc.0: musb_init_controller failed with
> > status -19
> > [ 0.442718] NET: Registered protocol family 2
> > [ 0.443664] IP route cache hash table entries: 2048 (order: 1, 8192
> > bytes)
> > [ 0.446136] TCP established hash table entries: 8192 (order: 4, 65536
> > bytes)
> > [ 0.446746] TCP bind hash table entries: 8192 (order: 6, 360448 bytes)
> > [ 0.452423] TCP: Hash tables configured (established 8192 bind 8192)
> > [ 0.452545] TCP reno registered
> > [ 0.452606] UDP hash table entries: 128 (order: 1, 12288 bytes)
> > [ 0.453033] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes)
> > [ 0.454437] NET: Registered protocol family 1
> > [ 0.456481] RPC: Registered udp transport module.
> > [ 0.456512] RPC: Registered tcp transport module.
> > [ 0.456542] RPC: Registered tcp NFSv4.1 backchannel transport module.
> > [ 0.457855] NetWinder Floating Point Emulator V0.97 (double precision)
> > [ 0.461059] platform iva.0: Enabled OPP corresponding to 720MHz
> > [ 0.465179] omap-iommu omap-iommu.0: isp registered
> > [ 0.466308] OMAP35x Linux PSP version 04.02.00.07 (OMAP3BEAGLE)
> > [ 0.654205] VFS: Disk quotas dquot_6.5.2
> > [ 0.654388] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > [ 0.657714] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat,
> > Inc.
> > [ 0.659271] msgmni has been set to 474
> > [ 0.665100] io scheduler noop registered
> > [ 0.665191] io scheduler deadline registered
> > [ 0.665435] io scheduler cfq registered (default)
> > [ 0.728576] OMAP DSS rev 2.0
> > [ 0.729248] OMAP DISPC rev 3.0
> > [ 0.729431] OMAP VENC rev 2
> > [ 0.730957] OMAP DSI rev 1.0
> > [ 1.060791] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > [ 1.073242] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP
> > UART0
> > [ 1.076141] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP
> > UART1
> > [ 1.078155] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP
> > UART2
> > [ 1.821472] console [ttyO2] enabled
> > [ 1.889343] brd: module loaded
> > [ 1.923370] loop: module loaded
> > [ 1.935363] mtdoops: mtd device (mtddev=name/number) must be supplied
> > [ 1.942352] omap2-nand driver initializing
> > [ 1.947479] ONFI flash detected
> > [ 1.951019] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron
> )
> > [ 1.958160] Creating 5 MTD partitions on "omap2-nand.0":
> > [ 1.963836] 0x000000000000-0x000000080000 : "X-Loader"
> > [ 1.982055] 0x000000080000-0x000000260000 : "U-Boot"
> > [ 1.997100] 0x000000260000-0x000000280000 : "U-Boot Env"
> > [ 2.011535] 0x000000280000-0x000000680000 : "Kernel"
> > [ 2.027618] 0x000000680000-0x000020000000 : "File System"
> > [ 2.298248] OneNAND driver initializing
> > [ 2.315246] mice: PS/2 mouse device common for all mice
> > [ 2.324920] input: gpio-keys as
> /devices/platform/gpio-keys/input/input0
> > [ 2.343780] omap_device: omap_i2c.1: new worst case activate latency
> 0:
> > 91552
> > [ 2.352966] input: twl4030_pwrbutton as
> >
> /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
> > [ 2.372009] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
> > [ 2.379119] twl_rtc twl_rtc: Power up reset detected.
> > [ 2.385589] twl_rtc twl_rtc: Enabling TWL-RTC.
> > [ 2.393066] i2c /dev entries driver
> > [ 2.405456] Linux media interface: v0.10
> > [ 2.410736] Linux video capture interface: v2.00
> > [ 2.418273] omap3isp supply VDD_CSIPHY1 not found, using dummy
> regulator
> > [ 2.425506] omap3isp supply VDD_CSIPHY2 not found, using dummy
> regulator
> > [ 2.433227] omap3isp omap3isp: Revision 2.0 found
> > [ 2.438476] omap-iommu omap-iommu.0: isp: version 1.1
> > [ 2.559204] omap_i2c omap_i2c.2: Arbitration lost
> > [ 2.580078] mt9v113 2-003c: chip id mismatch read 0x0, expecting
> 0x2280
> > [ 2.597198] isp_register_subdev_group: Unable to register subdev
> mt9v113
> > [ 2.605865] omap_device: omap_wdt.-1: new worst case activate latency
> 0:
> > 30517
> > [ 2.616241] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
> > [ 2.622711] omap_device: omap_wdt.-1: new worst case deactivate
> latency
> > 0: 30517
> > [ 2.632354] twl4030_wdt twl4030_wdt: Failed to register misc device
> > [ 2.639099] twl4030_wdt: probe of twl4030_wdt failed with error -16
> > [ 2.668334] usbcore: registered new interface driver usbhid
> > [ 2.674285] usbhid: USB HID core driver
> > [ 2.686126] ALSA device list:
> > [ 2.689392] No soundcards found.
> > [ 2.692962] oprofile: hardware counters not available
> > [ 2.698333] oprofile: using timer interrupt.
> > [ 2.703430] TCP cubic registered
> > [ 2.706939] Initializing XFRM netlink socket
> > [ 2.711639] NET: Registered protocol family 17
> > [ 2.716613] NET: Registered protocol family 15
> > [ 2.722045] Registering the dns_resolver key type
> > [ 2.727783] VFP support v0.3: implementor 41 architecture 3 part 30
> > variant c rev 1
> > [ 2.737945] ThumbEE CPU extension supported.
> > [ 2.764984] Power Management for TI OMAP3.
> > [ 2.770355] sr_init: No PMIC hook to init smartreflex
> > [ 2.776336] smartreflex smartreflex.0: omap_sr_probe: SmartReflex
> driver
> > initialized
> > [ 2.785644] smartreflex smartreflex.1: omap_sr_probe: SmartReflex
> driver
> > initialized
> > [ 2.795776] SmartReflex Class3 initialized
> > [ 2.863677] clock: disabling unused clocks to save power
> > [ 2.872497] platform iva.0: omap_voltage_scale: Already at the
> > requestedrate 360000000
> > [ 2.880920] platform mpu.0: omap_voltage_scale: Already at the
> > requestedrate 500000000
> > [ 2.889343] platform l3_main.0: omap_voltage_scale: Already at the
> > requestedrate 166000000
> > [ 2.931488] omap_device: omap_i2c.1: new worst case deactivate
> latency 0:
> > 122070
> > [ 2.940246] regulator_init_complete: incomplete constraints, leaving
> VDAC
> > on
> > [ 2.952911] twl_rtc twl_rtc: setting system clock to 2000-01-01
> 00:00:00
> > UTC (946684800)
> > [ 2.962005] omap_vout omap_vout: Buffer Size = 3686400
> > [ 2.971313] omap_vout omap_vout: : registered and initialized video
> > device 15
> > [ 2.978973] omap_vout omap_vout: Buffer Size = 3686400
> > [ 2.987640] omap_vout omap_vout: : registered and initialized video
> > device 16
> > [ 3.002319] Waiting for root device /dev/mmcblk0p2...
> > [ 3.166046] mmc0: new high speed SDHC card at address aaaa
> > [ 3.175537] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
> > [ 3.200164] mmcblk0: p1 p2
> > [ 3.232910] EXT3-fs: barriers not enabled
> > [ 3.312805] kjournald starting. Commit interval 5 seconds
> > [ 3.319183] EXT3-fs (mmcblk0p2): warning: maximal mount count reached,
> > running e2fsck is recommended
> > [ 3.333465] EXT3-fs (mmcblk0p2): using internal journal
> > [ 3.339080] EXT3-fs (mmcblk0p2): recovery complete
> > [ 3.347442] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data
> > mode
> > [ 3.355468] VFS: Mounted root (ext3 filesystem) on device 179:2.
> > [ 3.362091] Freeing init memory: 200K
> > Failed to open /dev/kmsg for logging: No such file or directory
> > [ 3.685821] <30>systemd[1]: systemd 37 running in system mode. (+PAM
> > +LIBWRAP -AUDIT -SELINUX +SYSVINIT -LIBCRYPTSETUP; angstrom)
> >
> > Welcome to The ֵngstrצm Distribution!
> >
> > [ 3.784942] <28>systemd[1]: /sbin/modprobe failed with error code 1.
> > [ 3.796173] <30>systemd[1]: Set hostname to <beagleboard>.
> > [ 4.271270] <27>systemd[1]: Failed to open /dev/autofs: No such file
> or
> > directory
>
> add: CONFIG_AUTOFS4_FS=y
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/RznTdyaz2gg/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
