Perhaps running dmesg will give you a better idea of what's going on. If nothing else it'll give you some output to post here for others to have a better idea of whats going on.
*example* william@beaglebone:~$ dmesg | grep eth [ 4.483906] cpsw 4a100000.ethernet: Detected MACID = 78:a5:04:ca:fb:dc [ 12.770249] net eth0: initializing cpsw version 1.12 (0) [ 12.780876] net eth0: phy found : id is : 0x7c0f1 [ 12.795971] net eth0: phy 4a101000.mdio:03 not found on slave 1 [ 12.806243] net eth0: BQL enabled [ 14.773478] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [563836.873858] cpsw 4a100000.ethernet eth0: Link is Down [563838.954250] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [566399.033841] cpsw 4a100000.ethernet eth0: Link is Down [566401.114229] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx On Thu, Mar 10, 2016 at 7:56 PM, Cornelius Lee <[email protected]> wrote: > Hi Robert, > > I have just flashed > https://rcn-ee.com/rootfs/bb.org/testing/2016-03-09/lxqt-4gb/BBB-eMMC-flasher-debian-8.3-lxqt-4gb-armhf-2016-03-09-4gb.img.xz > > and i can't ping to 192.168.7.2. Furthermore, ifconfig pulls up no inet > address on eth1. > > Any idea why? > > > Regards, > Cornelius > > > > On Thu, Mar 10, 2016 at 11:56 PM, Robert Nelson <[email protected]> > wrote: > >> On Thu, Mar 10, 2016 at 9:50 AM, Cornelius Lee <[email protected]> >> wrote: >> > Ah, great! Thank you. >> > I will test it tomorrow in the morning at the office then. >> > I will keep you updated too. =) >> > >> > Goodnight from Singapore. >> >> BTW, I'm not sure how to reverse connman's direction: >> >> But right now, when you plug in the usb connector, your laptop/desktop >> will get an ip (192.168.7.x) and use the bbb for internet over your >> laptop/desktop's wifi/ethernet.. So if you plug in an ethernet cable >> into the bbb, you'll get network access again on your laptop/desktop.. >> >> Trying to figure out how to reverse that. ;) >> >> Regards, >> >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/cvW0j4knXe4/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
