Hi William and Robert,
Sorry about the long output a while ago,..I was trying to be as accurate as
possible.
William:
cornelius@cornelius ~ $ sudo ifup eth1
Ignoring unknown interface eth1=eth1.
Robert:
ifconfig -a gives:
eth0 Link encap:Ethernet HWaddr ec:f4:bb:0f:df:a3
inet addr:10.102.16.110 Bcast:10.102.17.255 Mask:255.255.254.0
inet6 addr: fe80::eef4:bbff:fe0f:dfa3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1545343 errors:0 dropped:0 overruns:0 frame:0
TX packets:584402 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1895631248 (1.8 GB) TX bytes:46481091 (46.4 MB)
Interrupt:20 Memory:f7e00000-f7e20000
eth1 Link encap:Ethernet HWaddr a0:f6:fd:4b:fd:c9
inet6 addr: fe80::a2f6:fdff:fe4b:fdc9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:44 errors:3 dropped:0 overruns:0 frame:3
TX packets:2 errors:638 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:10678 (10.6 KB) TX bytes:256 (256.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:5072 errors:0 dropped:0 overruns:0 frame:0
TX packets:5072 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:475569 (475.5 KB) TX bytes:475569 (475.5 KB)
wlan0 Link encap:Ethernet HWaddr ac:7b:a1:39:3e:47
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
and,...sudo dhclient eth1 just gives me a blinking cusor staring blankly at
me. Hhhmm,...
On Fri, Mar 11, 2016 at 11:33 AM, Robert Nelson <[email protected]>
wrote:
> On Thu, Mar 10, 2016 at 9:19 PM, Cornelius Lee <[email protected]>
> wrote:
> > Hi William,
> >
> > Thank you for your email,...below is what I get from running that
> command.
> >
> > cornelius@cornelius ~ $ dmesg|grep eth
> > [ 0.988379] e1000e 0000:00:19.0 eth0: registered PHC clock
> > [ 0.988382] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
> > ec:f4:bb:0f:df:a3
> > [ 0.988383] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
> > Connection
> > [ 0.988419] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No:
> > FFFFFF-0FF
> > [ 4.860468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> > [ 7.445242] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
> > Control: None
> > [ 7.445246] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
> > [ 7.445274] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > [ 2935.339583] usbcore: registered new interface driver cdc_ether
> > [ 2935.341774] rndis_host 1-2:1.0 eth1: register 'rndis_host' at
> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9
> > [ 3005.699765] NETDEV WATCHDOG: eth1 (rndis_host): transmit queue 0 timed
> > out
> > [ 3005.699766] Modules linked in: rndis_wlan rndis_host cdc_ether usbnet
> mii
> > cdc_acm nls_iso8859_1 uas usb_storage xt_multiport iptable_filter
> ip_tables
> > x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE)
> > pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap uvcvideo
> > videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev
> media
> > hid_logitech_hidpp snd_usb_audio snd_usbmidi_lib dell_laptop dcdbas i8k
> > dm_multipath scsi_dh intel_rapl iosf_mbi x86_pkg_temp_thermal
> > intel_powerclamp coretemp kvm_intel arc4 kvm bnep snd_hda_codec_hdmi
> > crct10dif_pclmul rfcomm crc32_pclmul ghash_clmulni_intel
> > snd_hda_codec_realtek snd_hda_codec_generic snd_soc_rt5640 iwlmvm
> bluetooth
> > snd_soc_rl6231 mac80211 aesni_intel snd_soc_core aes_x86_64 lrw gf128mul
> > snd_compress glue_helper ablk_helper snd_pcm_dmaengine cryptd
> snd_hda_intel
> > snd_hda_controller snd_seq_midi snd_hda_codec snd_seq_midi_event
> snd_hwdep
> > snd_rawmidi iwlwifi snd_pcm joydev serio_raw cfg80211 lpc_ich shpchp
> mei_me
> > mei 8250_fintek dw_dmac dell_smo8800 dw_dmac_core snd_seq snd_seq_device
> > snd_soc_sst_acpi snd_timer snd i2c_hid 8250_dw spi_pxa2xx_platform
> > i2c_designware_platform i2c_designware_core binfmt_misc dell_rbtn mac_hid
> > soundcore parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log
> > hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci i2c_algo_bit
> > libahci sdhci_pci drm_kms_helper e1000e drm ptp pps_core wmi video
> > sdhci_acpi sdhci
> > [ 3361.518375] rndis_host 1-2:1.0 eth1: unregister 'rndis_host'
> > usb-0000:00:14.0-2, RNDIS device
> > [ 3395.837660] rndis_host 1-2:1.0 eth1: register 'rndis_host' at
> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9
> >
> >
> > and running dmesg|grep usb gives me the following,...
> >
> > [ 2935.309616] usb 1-2: Product: BeagleBoneBlack
> > [ 2935.309617] usb 1-2: Manufacturer: Circuitco
> > [ 2935.309618] usb 1-2: SerialNumber: 5315BBBK0EEE
> > [ 2935.311093] usb-storage 1-2:1.4: USB Mass Storage device detected
> > [ 2935.311147] scsi host5: usb-storage 1-2:1.4
> > [ 2935.332057] usbcore: registered new interface driver cdc_acm
> > [ 2935.339583] usbcore: registered new interface driver cdc_ether
> > [ 2935.341774] rndis_host 1-2:1.0 eth1: register 'rndis_host' at
> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9
> > [ 2935.341859] usbcore: registered new interface driver rndis_host
> > [ 2935.344118] usbcore: registered new interface driver rndis_wlan
> > [ 3005.699766] Modules linked in: rndis_wlan rndis_host cdc_ether usbnet
> mii
> > cdc_acm nls_iso8859_1 uas usb_storage xt_multiport iptable_filter
> ip_tables
> > x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE)
> > pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap uvcvideo
> > videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev
> media
> > hid_logitech_hidpp snd_usb_audio snd_usbmidi_lib dell_laptop dcdbas i8k
> > dm_multipath scsi_dh intel_rapl iosf_mbi x86_pkg_temp_thermal
> > intel_powerclamp coretemp kvm_intel arc4 kvm bnep snd_hda_codec_hdmi
> > crct10dif_pclmul rfcomm crc32_pclmul ghash_clmulni_intel
> > snd_hda_codec_realtek snd_hda_codec_generic snd_soc_rt5640 iwlmvm
> bluetooth
> > snd_soc_rl6231 mac80211 aesni_intel snd_soc_core aes_x86_64 lrw gf128mul
> > snd_compress glue_helper ablk_helper snd_pcm_dmaengine cryptd
> snd_hda_intel
> > snd_hda_controller snd_seq_midi snd_hda_codec snd_seq_midi_event
> snd_hwdep
> > snd_rawmidi iwlwifi snd_pcm joydev serio_raw cfg80211 lpc_ich shpchp
> mei_me
> > mei 8250_fintek dw_dmac dell_smo8800 dw_dmac_core snd_seq snd_seq_device
> > snd_soc_sst_acpi snd_timer snd i2c_hid 8250_dw spi_pxa2xx_platform
> > i2c_designware_platform i2c_designware_core binfmt_misc dell_rbtn mac_hid
> > soundcore parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log
> > hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci i2c_algo_bit
> > libahci sdhci_pci drm_kms_helper e1000e drm ptp pps_core wmi video
> > sdhci_acpi sdhci
> > [ 3361.518323] usb 1-2: USB disconnect, device number 5
> > [ 3361.518375] rndis_host 1-2:1.0 eth1: unregister 'rndis_host'
> > usb-0000:00:14.0-2, RNDIS device
> > [ 3395.707524] usb 1-2: new high-speed USB device number 6 using xhci_hcd
> > [ 3395.835858] usb 1-2: New USB device found, idVendor=1d6b,
> idProduct=0104
> > [ 3395.835863] usb 1-2: New USB device strings: Mfr=3, Product=4,
> > SerialNumber=5
> > [ 3395.835865] usb 1-2: Product: BeagleBoneBlack
> > [ 3395.835867] usb 1-2: Manufacturer: Circuitco
> > [ 3395.835869] usb 1-2: SerialNumber: 5315BBBK0EEE
> > [ 3395.837660] rndis_host 1-2:1.0 eth1: register 'rndis_host' at
> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9
> > [ 3395.838325] usb-storage 1-2:1.4: USB Mass Storage device detected
> > [ 3395.838386] scsi host6: usb-storage 1-2:1.4
>
> It's coming thru..
>
> what does:
>
> sudo dhclient eth1
> sudo ifconfig -a
>
> show?
>
> Regards,
>
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/cvW0j4knXe4/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
