Cornelius, your host computer is a Mac ? Which OSX version ? just noticing your ethernet IP range . . .
On Thu, Mar 10, 2016 at 8:44 PM, William Hermans <[email protected]> wrote: > Ok, from here, I believe you could in fact set a static IP on the host and > have it mostly, with perhaps having to manually route, if you decided to > use ICS . . . but I've a feeling Robert may have a better solution . . . > > On Thu, Mar 10, 2016 at 8:40 PM, Cornelius Lee <[email protected]> > wrote: > >> Hi William and Robert, >> >> Sorry about the long output a while ago,..I was trying to be as accurate >> as possible. >> >> William: >> cornelius@cornelius ~ $ sudo ifup eth1 >> Ignoring unknown interface eth1=eth1. >> >> >> Robert: >> ifconfig -a gives: >> >> eth0 Link encap:Ethernet HWaddr ec:f4:bb:0f:df:a3 >> inet addr:10.102.16.110 Bcast:10.102.17.255 Mask:255.255.254.0 >> inet6 addr: fe80::eef4:bbff:fe0f:dfa3/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:1545343 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:584402 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:1895631248 (1.8 GB) TX bytes:46481091 (46.4 MB) >> Interrupt:20 Memory:f7e00000-f7e20000 >> >> eth1 Link encap:Ethernet HWaddr a0:f6:fd:4b:fd:c9 >> inet6 addr: fe80::a2f6:fdff:fe4b:fdc9/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:44 errors:3 dropped:0 overruns:0 frame:3 >> TX packets:2 errors:638 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:10678 (10.6 KB) TX bytes:256 (256.0 B) >> >> lo Link encap:Local Loopback >> inet addr:127.0.0.1 Mask:255.0.0.0 >> inet6 addr: ::1/128 Scope:Host >> UP LOOPBACK RUNNING MTU:65536 Metric:1 >> RX packets:5072 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:5072 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:0 >> RX bytes:475569 (475.5 KB) TX bytes:475569 (475.5 KB) >> >> wlan0 Link encap:Ethernet HWaddr ac:7b:a1:39:3e:47 >> BROADCAST MULTICAST MTU:1500 Metric:1 >> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >> >> and,...sudo dhclient eth1 just gives me a blinking cusor staring blankly >> at me. Hhhmm,... >> >> >> On Fri, Mar 11, 2016 at 11:33 AM, Robert Nelson <[email protected]> >> wrote: >> >>> On Thu, Mar 10, 2016 at 9:19 PM, Cornelius Lee <[email protected]> >>> wrote: >>> > Hi William, >>> > >>> > Thank you for your email,...below is what I get from running that >>> command. >>> > >>> > cornelius@cornelius ~ $ dmesg|grep eth >>> > [ 0.988379] e1000e 0000:00:19.0 eth0: registered PHC clock >>> > [ 0.988382] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) >>> > ec:f4:bb:0f:df:a3 >>> > [ 0.988383] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network >>> > Connection >>> > [ 0.988419] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: >>> > FFFFFF-0FF >>> > [ 4.860468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >>> > [ 7.445242] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow >>> > Control: None >>> > [ 7.445246] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO >>> > [ 7.445274] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >>> > [ 2935.339583] usbcore: registered new interface driver cdc_ether >>> > [ 2935.341774] rndis_host 1-2:1.0 eth1: register 'rndis_host' at >>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9 >>> > [ 3005.699765] NETDEV WATCHDOG: eth1 (rndis_host): transmit queue 0 >>> timed >>> > out >>> > [ 3005.699766] Modules linked in: rndis_wlan rndis_host cdc_ether >>> usbnet mii >>> > cdc_acm nls_iso8859_1 uas usb_storage xt_multiport iptable_filter >>> ip_tables >>> > x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) >>> > pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap uvcvideo >>> > videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev >>> media >>> > hid_logitech_hidpp snd_usb_audio snd_usbmidi_lib dell_laptop dcdbas i8k >>> > dm_multipath scsi_dh intel_rapl iosf_mbi x86_pkg_temp_thermal >>> > intel_powerclamp coretemp kvm_intel arc4 kvm bnep snd_hda_codec_hdmi >>> > crct10dif_pclmul rfcomm crc32_pclmul ghash_clmulni_intel >>> > snd_hda_codec_realtek snd_hda_codec_generic snd_soc_rt5640 iwlmvm >>> bluetooth >>> > snd_soc_rl6231 mac80211 aesni_intel snd_soc_core aes_x86_64 lrw >>> gf128mul >>> > snd_compress glue_helper ablk_helper snd_pcm_dmaengine cryptd >>> snd_hda_intel >>> > snd_hda_controller snd_seq_midi snd_hda_codec snd_seq_midi_event >>> snd_hwdep >>> > snd_rawmidi iwlwifi snd_pcm joydev serio_raw cfg80211 lpc_ich shpchp >>> mei_me >>> > mei 8250_fintek dw_dmac dell_smo8800 dw_dmac_core snd_seq >>> snd_seq_device >>> > snd_soc_sst_acpi snd_timer snd i2c_hid 8250_dw spi_pxa2xx_platform >>> > i2c_designware_platform i2c_designware_core binfmt_misc dell_rbtn >>> mac_hid >>> > soundcore parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log >>> > hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci i2c_algo_bit >>> > libahci sdhci_pci drm_kms_helper e1000e drm ptp pps_core wmi video >>> > sdhci_acpi sdhci >>> > [ 3361.518375] rndis_host 1-2:1.0 eth1: unregister 'rndis_host' >>> > usb-0000:00:14.0-2, RNDIS device >>> > [ 3395.837660] rndis_host 1-2:1.0 eth1: register 'rndis_host' at >>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9 >>> > >>> > >>> > and running dmesg|grep usb gives me the following,... >>> > >>> > [ 2935.309616] usb 1-2: Product: BeagleBoneBlack >>> > [ 2935.309617] usb 1-2: Manufacturer: Circuitco >>> > [ 2935.309618] usb 1-2: SerialNumber: 5315BBBK0EEE >>> > [ 2935.311093] usb-storage 1-2:1.4: USB Mass Storage device detected >>> > [ 2935.311147] scsi host5: usb-storage 1-2:1.4 >>> > [ 2935.332057] usbcore: registered new interface driver cdc_acm >>> > [ 2935.339583] usbcore: registered new interface driver cdc_ether >>> > [ 2935.341774] rndis_host 1-2:1.0 eth1: register 'rndis_host' at >>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9 >>> > [ 2935.341859] usbcore: registered new interface driver rndis_host >>> > [ 2935.344118] usbcore: registered new interface driver rndis_wlan >>> > [ 3005.699766] Modules linked in: rndis_wlan rndis_host cdc_ether >>> usbnet mii >>> > cdc_acm nls_iso8859_1 uas usb_storage xt_multiport iptable_filter >>> ip_tables >>> > x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) >>> > pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap uvcvideo >>> > videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev >>> media >>> > hid_logitech_hidpp snd_usb_audio snd_usbmidi_lib dell_laptop dcdbas i8k >>> > dm_multipath scsi_dh intel_rapl iosf_mbi x86_pkg_temp_thermal >>> > intel_powerclamp coretemp kvm_intel arc4 kvm bnep snd_hda_codec_hdmi >>> > crct10dif_pclmul rfcomm crc32_pclmul ghash_clmulni_intel >>> > snd_hda_codec_realtek snd_hda_codec_generic snd_soc_rt5640 iwlmvm >>> bluetooth >>> > snd_soc_rl6231 mac80211 aesni_intel snd_soc_core aes_x86_64 lrw >>> gf128mul >>> > snd_compress glue_helper ablk_helper snd_pcm_dmaengine cryptd >>> snd_hda_intel >>> > snd_hda_controller snd_seq_midi snd_hda_codec snd_seq_midi_event >>> snd_hwdep >>> > snd_rawmidi iwlwifi snd_pcm joydev serio_raw cfg80211 lpc_ich shpchp >>> mei_me >>> > mei 8250_fintek dw_dmac dell_smo8800 dw_dmac_core snd_seq >>> snd_seq_device >>> > snd_soc_sst_acpi snd_timer snd i2c_hid 8250_dw spi_pxa2xx_platform >>> > i2c_designware_platform i2c_designware_core binfmt_misc dell_rbtn >>> mac_hid >>> > soundcore parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log >>> > hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci i2c_algo_bit >>> > libahci sdhci_pci drm_kms_helper e1000e drm ptp pps_core wmi video >>> > sdhci_acpi sdhci >>> > [ 3361.518323] usb 1-2: USB disconnect, device number 5 >>> > [ 3361.518375] rndis_host 1-2:1.0 eth1: unregister 'rndis_host' >>> > usb-0000:00:14.0-2, RNDIS device >>> > [ 3395.707524] usb 1-2: new high-speed USB device number 6 using >>> xhci_hcd >>> > [ 3395.835858] usb 1-2: New USB device found, idVendor=1d6b, >>> idProduct=0104 >>> > [ 3395.835863] usb 1-2: New USB device strings: Mfr=3, Product=4, >>> > SerialNumber=5 >>> > [ 3395.835865] usb 1-2: Product: BeagleBoneBlack >>> > [ 3395.835867] usb 1-2: Manufacturer: Circuitco >>> > [ 3395.835869] usb 1-2: SerialNumber: 5315BBBK0EEE >>> > [ 3395.837660] rndis_host 1-2:1.0 eth1: register 'rndis_host' at >>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9 >>> > [ 3395.838325] usb-storage 1-2:1.4: USB Mass Storage device detected >>> > [ 3395.838386] scsi host6: usb-storage 1-2:1.4 >>> >>> It's coming thru.. >>> >>> what does: >>> >>> sudo dhclient eth1 >>> sudo ifconfig -a >>> >>> show? >>> >>> Regards, >>> >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/beagleboard/cvW0j4knXe4/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
