Ok, from here, I believe you could in fact set a static IP on the host and
have it mostly, with perhaps having to manually route, if you decided to
use ICS . . . but I've a feeling Robert may have a better solution . . .

On Thu, Mar 10, 2016 at 8:40 PM, Cornelius Lee <[email protected]>
wrote:

> Hi William and Robert,
>
> Sorry about the long output a while ago,..I was trying to be as accurate
> as possible.
>
> William:
> cornelius@cornelius ~ $ sudo ifup eth1
> Ignoring unknown interface eth1=eth1.
>
>
> Robert:
> ifconfig -a gives:
>
> eth0      Link encap:Ethernet  HWaddr ec:f4:bb:0f:df:a3
>           inet addr:10.102.16.110  Bcast:10.102.17.255  Mask:255.255.254.0
>           inet6 addr: fe80::eef4:bbff:fe0f:dfa3/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:1545343 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:584402 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:1895631248 (1.8 GB)  TX bytes:46481091 (46.4 MB)
>           Interrupt:20 Memory:f7e00000-f7e20000
>
> eth1      Link encap:Ethernet  HWaddr a0:f6:fd:4b:fd:c9
>           inet6 addr: fe80::a2f6:fdff:fe4b:fdc9/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:44 errors:3 dropped:0 overruns:0 frame:3
>           TX packets:2 errors:638 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:10678 (10.6 KB)  TX bytes:256 (256.0 B)
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:65536  Metric:1
>           RX packets:5072 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:5072 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:475569 (475.5 KB)  TX bytes:475569 (475.5 KB)
>
> wlan0     Link encap:Ethernet  HWaddr ac:7b:a1:39:3e:47
>           BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> and,...sudo dhclient eth1 just gives me a blinking cusor staring blankly
> at me. Hhhmm,...
>
>
> On Fri, Mar 11, 2016 at 11:33 AM, Robert Nelson <[email protected]>
> wrote:
>
>> On Thu, Mar 10, 2016 at 9:19 PM, Cornelius Lee <[email protected]>
>> wrote:
>> > Hi William,
>> >
>> > Thank you for your email,...below is what I get from running that
>> command.
>> >
>> > cornelius@cornelius ~ $ dmesg|grep eth
>> > [    0.988379] e1000e 0000:00:19.0 eth0: registered PHC clock
>> > [    0.988382] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
>> > ec:f4:bb:0f:df:a3
>> > [    0.988383] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
>> > Connection
>> > [    0.988419] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No:
>> > FFFFFF-0FF
>> > [    4.860468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> > [    7.445242] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
>> > Control: None
>> > [    7.445246] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
>> > [    7.445274] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> > [ 2935.339583] usbcore: registered new interface driver cdc_ether
>> > [ 2935.341774] rndis_host 1-2:1.0 eth1: register 'rndis_host' at
>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9
>> > [ 3005.699765] NETDEV WATCHDOG: eth1 (rndis_host): transmit queue 0
>> timed
>> > out
>> > [ 3005.699766] Modules linked in: rndis_wlan rndis_host cdc_ether
>> usbnet mii
>> > cdc_acm nls_iso8859_1 uas usb_storage xt_multiport iptable_filter
>> ip_tables
>> > x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE)
>> > pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap uvcvideo
>> > videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev
>> media
>> > hid_logitech_hidpp snd_usb_audio snd_usbmidi_lib dell_laptop dcdbas i8k
>> > dm_multipath scsi_dh intel_rapl iosf_mbi x86_pkg_temp_thermal
>> > intel_powerclamp coretemp kvm_intel arc4 kvm bnep snd_hda_codec_hdmi
>> > crct10dif_pclmul rfcomm crc32_pclmul ghash_clmulni_intel
>> > snd_hda_codec_realtek snd_hda_codec_generic snd_soc_rt5640 iwlmvm
>> bluetooth
>> > snd_soc_rl6231 mac80211 aesni_intel snd_soc_core aes_x86_64 lrw gf128mul
>> > snd_compress glue_helper ablk_helper snd_pcm_dmaengine cryptd
>> snd_hda_intel
>> > snd_hda_controller snd_seq_midi snd_hda_codec snd_seq_midi_event
>> snd_hwdep
>> > snd_rawmidi iwlwifi snd_pcm joydev serio_raw cfg80211 lpc_ich shpchp
>> mei_me
>> > mei 8250_fintek dw_dmac dell_smo8800 dw_dmac_core snd_seq snd_seq_device
>> > snd_soc_sst_acpi snd_timer snd i2c_hid 8250_dw spi_pxa2xx_platform
>> > i2c_designware_platform i2c_designware_core binfmt_misc dell_rbtn
>> mac_hid
>> > soundcore parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log
>> > hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci i2c_algo_bit
>> > libahci sdhci_pci drm_kms_helper e1000e drm ptp pps_core wmi video
>> > sdhci_acpi sdhci
>> > [ 3361.518375] rndis_host 1-2:1.0 eth1: unregister 'rndis_host'
>> > usb-0000:00:14.0-2, RNDIS device
>> > [ 3395.837660] rndis_host 1-2:1.0 eth1: register 'rndis_host' at
>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9
>> >
>> >
>> > and running dmesg|grep usb gives me the following,...
>> >
>> > [ 2935.309616] usb 1-2: Product: BeagleBoneBlack
>> > [ 2935.309617] usb 1-2: Manufacturer: Circuitco
>> > [ 2935.309618] usb 1-2: SerialNumber: 5315BBBK0EEE
>> > [ 2935.311093] usb-storage 1-2:1.4: USB Mass Storage device detected
>> > [ 2935.311147] scsi host5: usb-storage 1-2:1.4
>> > [ 2935.332057] usbcore: registered new interface driver cdc_acm
>> > [ 2935.339583] usbcore: registered new interface driver cdc_ether
>> > [ 2935.341774] rndis_host 1-2:1.0 eth1: register 'rndis_host' at
>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9
>> > [ 2935.341859] usbcore: registered new interface driver rndis_host
>> > [ 2935.344118] usbcore: registered new interface driver rndis_wlan
>> > [ 3005.699766] Modules linked in: rndis_wlan rndis_host cdc_ether
>> usbnet mii
>> > cdc_acm nls_iso8859_1 uas usb_storage xt_multiport iptable_filter
>> ip_tables
>> > x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE)
>> > pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap uvcvideo
>> > videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev
>> media
>> > hid_logitech_hidpp snd_usb_audio snd_usbmidi_lib dell_laptop dcdbas i8k
>> > dm_multipath scsi_dh intel_rapl iosf_mbi x86_pkg_temp_thermal
>> > intel_powerclamp coretemp kvm_intel arc4 kvm bnep snd_hda_codec_hdmi
>> > crct10dif_pclmul rfcomm crc32_pclmul ghash_clmulni_intel
>> > snd_hda_codec_realtek snd_hda_codec_generic snd_soc_rt5640 iwlmvm
>> bluetooth
>> > snd_soc_rl6231 mac80211 aesni_intel snd_soc_core aes_x86_64 lrw gf128mul
>> > snd_compress glue_helper ablk_helper snd_pcm_dmaengine cryptd
>> snd_hda_intel
>> > snd_hda_controller snd_seq_midi snd_hda_codec snd_seq_midi_event
>> snd_hwdep
>> > snd_rawmidi iwlwifi snd_pcm joydev serio_raw cfg80211 lpc_ich shpchp
>> mei_me
>> > mei 8250_fintek dw_dmac dell_smo8800 dw_dmac_core snd_seq snd_seq_device
>> > snd_soc_sst_acpi snd_timer snd i2c_hid 8250_dw spi_pxa2xx_platform
>> > i2c_designware_platform i2c_designware_core binfmt_misc dell_rbtn
>> mac_hid
>> > soundcore parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log
>> > hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci i2c_algo_bit
>> > libahci sdhci_pci drm_kms_helper e1000e drm ptp pps_core wmi video
>> > sdhci_acpi sdhci
>> > [ 3361.518323] usb 1-2: USB disconnect, device number 5
>> > [ 3361.518375] rndis_host 1-2:1.0 eth1: unregister 'rndis_host'
>> > usb-0000:00:14.0-2, RNDIS device
>> > [ 3395.707524] usb 1-2: new high-speed USB device number 6 using
>> xhci_hcd
>> > [ 3395.835858] usb 1-2: New USB device found, idVendor=1d6b,
>> idProduct=0104
>> > [ 3395.835863] usb 1-2: New USB device strings: Mfr=3, Product=4,
>> > SerialNumber=5
>> > [ 3395.835865] usb 1-2: Product: BeagleBoneBlack
>> > [ 3395.835867] usb 1-2: Manufacturer: Circuitco
>> > [ 3395.835869] usb 1-2: SerialNumber: 5315BBBK0EEE
>> > [ 3395.837660] rndis_host 1-2:1.0 eth1: register 'rndis_host' at
>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9
>> > [ 3395.838325] usb-storage 1-2:1.4: USB Mass Storage device detected
>> > [ 3395.838386] scsi host6: usb-storage 1-2:1.4
>>
>> It's coming thru..
>>
>> what does:
>>
>> sudo dhclient eth1
>> sudo ifconfig -a
>>
>> show?
>>
>> Regards,
>>
>>
>> --
>> Robert Nelson
>> https://rcn-ee.com/
>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to a topic in the
>> Google Groups "BeagleBoard" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/beagleboard/cvW0j4knXe4/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> [email protected].
>> For more options, visit https://groups.google.com/d/optout.
>>
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to