sudo apt-get install gtkterm and,.. gtkterm -s 115200 -p /dev/ttyACM0 brings up a window but i can't type anything in it...
On Fri, Mar 11, 2016 at 11:51 AM, Cornelius Lee <[email protected]> wrote: > William: > I am using Linux Mint in my host. > cornelius@cornelius /etc $ cat lsb-release > DISTRIB_ID=LinuxMint > DISTRIB_RELEASE=17.3 > DISTRIB_CODENAME=rosa > DISTRIB_DESCRIPTION="Linux Mint 17.3 Rosa" > > Robert: > cornelius@cornelius /etc $ journalctl|grep usb0 > journalctl: command not found > cornelius@cornelius /etc $ journalctl|grep -i dhcp > journalctl: command not found > > It seems to me that I will need to install a package that has that tool? > > > On Fri, Mar 11, 2016 at 11:47 AM, Cornelius Lee <[email protected]> > wrote: > >> hmm,..I must admit I am still quite new to networking principles at this >> stage. >> However, wouldn't that be impossible as I can't even access my BBB at all? >> >> >> On Fri, Mar 11, 2016 at 11:44 AM, William Hermans <[email protected]> >> wrote: >> >>> Ok, from here, I believe you could in fact set a static IP on the host >>> and have it mostly, with perhaps having to manually route, if you decided >>> to use ICS . . . but I've a feeling Robert may have a better solution . . . >>> >>> On Thu, Mar 10, 2016 at 8:40 PM, Cornelius Lee <[email protected]> >>> wrote: >>> >>>> Hi William and Robert, >>>> >>>> Sorry about the long output a while ago,..I was trying to be as >>>> accurate as possible. >>>> >>>> William: >>>> cornelius@cornelius ~ $ sudo ifup eth1 >>>> Ignoring unknown interface eth1=eth1. >>>> >>>> >>>> Robert: >>>> ifconfig -a gives: >>>> >>>> eth0 Link encap:Ethernet HWaddr ec:f4:bb:0f:df:a3 >>>> inet addr:10.102.16.110 Bcast:10.102.17.255 >>>> Mask:255.255.254.0 >>>> inet6 addr: fe80::eef4:bbff:fe0f:dfa3/64 Scope:Link >>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>>> RX packets:1545343 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:584402 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 txqueuelen:1000 >>>> RX bytes:1895631248 (1.8 GB) TX bytes:46481091 (46.4 MB) >>>> Interrupt:20 Memory:f7e00000-f7e20000 >>>> >>>> eth1 Link encap:Ethernet HWaddr a0:f6:fd:4b:fd:c9 >>>> inet6 addr: fe80::a2f6:fdff:fe4b:fdc9/64 Scope:Link >>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>>> RX packets:44 errors:3 dropped:0 overruns:0 frame:3 >>>> TX packets:2 errors:638 dropped:0 overruns:0 carrier:0 >>>> collisions:0 txqueuelen:1000 >>>> RX bytes:10678 (10.6 KB) TX bytes:256 (256.0 B) >>>> >>>> lo Link encap:Local Loopback >>>> inet addr:127.0.0.1 Mask:255.0.0.0 >>>> inet6 addr: ::1/128 Scope:Host >>>> UP LOOPBACK RUNNING MTU:65536 Metric:1 >>>> RX packets:5072 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:5072 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 txqueuelen:0 >>>> RX bytes:475569 (475.5 KB) TX bytes:475569 (475.5 KB) >>>> >>>> wlan0 Link encap:Ethernet HWaddr ac:7b:a1:39:3e:47 >>>> BROADCAST MULTICAST MTU:1500 Metric:1 >>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 txqueuelen:1000 >>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>> >>>> and,...sudo dhclient eth1 just gives me a blinking cusor staring >>>> blankly at me. Hhhmm,... >>>> >>>> >>>> On Fri, Mar 11, 2016 at 11:33 AM, Robert Nelson < >>>> [email protected]> wrote: >>>> >>>>> On Thu, Mar 10, 2016 at 9:19 PM, Cornelius Lee <[email protected]> >>>>> wrote: >>>>> > Hi William, >>>>> > >>>>> > Thank you for your email,...below is what I get from running that >>>>> command. >>>>> > >>>>> > cornelius@cornelius ~ $ dmesg|grep eth >>>>> > [ 0.988379] e1000e 0000:00:19.0 eth0: registered PHC clock >>>>> > [ 0.988382] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width >>>>> x1) >>>>> > ec:f4:bb:0f:df:a3 >>>>> > [ 0.988383] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network >>>>> > Connection >>>>> > [ 0.988419] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: >>>>> > FFFFFF-0FF >>>>> > [ 4.860468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >>>>> > [ 7.445242] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow >>>>> > Control: None >>>>> > [ 7.445246] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO >>>>> > [ 7.445274] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes >>>>> ready >>>>> > [ 2935.339583] usbcore: registered new interface driver cdc_ether >>>>> > [ 2935.341774] rndis_host 1-2:1.0 eth1: register 'rndis_host' at >>>>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9 >>>>> > [ 3005.699765] NETDEV WATCHDOG: eth1 (rndis_host): transmit queue 0 >>>>> timed >>>>> > out >>>>> > [ 3005.699766] Modules linked in: rndis_wlan rndis_host cdc_ether >>>>> usbnet mii >>>>> > cdc_acm nls_iso8859_1 uas usb_storage xt_multiport iptable_filter >>>>> ip_tables >>>>> > x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) >>>>> vboxdrv(OE) >>>>> > pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap uvcvideo >>>>> > videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common >>>>> videodev media >>>>> > hid_logitech_hidpp snd_usb_audio snd_usbmidi_lib dell_laptop dcdbas >>>>> i8k >>>>> > dm_multipath scsi_dh intel_rapl iosf_mbi x86_pkg_temp_thermal >>>>> > intel_powerclamp coretemp kvm_intel arc4 kvm bnep snd_hda_codec_hdmi >>>>> > crct10dif_pclmul rfcomm crc32_pclmul ghash_clmulni_intel >>>>> > snd_hda_codec_realtek snd_hda_codec_generic snd_soc_rt5640 iwlmvm >>>>> bluetooth >>>>> > snd_soc_rl6231 mac80211 aesni_intel snd_soc_core aes_x86_64 lrw >>>>> gf128mul >>>>> > snd_compress glue_helper ablk_helper snd_pcm_dmaengine cryptd >>>>> snd_hda_intel >>>>> > snd_hda_controller snd_seq_midi snd_hda_codec snd_seq_midi_event >>>>> snd_hwdep >>>>> > snd_rawmidi iwlwifi snd_pcm joydev serio_raw cfg80211 lpc_ich shpchp >>>>> mei_me >>>>> > mei 8250_fintek dw_dmac dell_smo8800 dw_dmac_core snd_seq >>>>> snd_seq_device >>>>> > snd_soc_sst_acpi snd_timer snd i2c_hid 8250_dw spi_pxa2xx_platform >>>>> > i2c_designware_platform i2c_designware_core binfmt_misc dell_rbtn >>>>> mac_hid >>>>> > soundcore parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log >>>>> > hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci i2c_algo_bit >>>>> > libahci sdhci_pci drm_kms_helper e1000e drm ptp pps_core wmi video >>>>> > sdhci_acpi sdhci >>>>> > [ 3361.518375] rndis_host 1-2:1.0 eth1: unregister 'rndis_host' >>>>> > usb-0000:00:14.0-2, RNDIS device >>>>> > [ 3395.837660] rndis_host 1-2:1.0 eth1: register 'rndis_host' at >>>>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9 >>>>> > >>>>> > >>>>> > and running dmesg|grep usb gives me the following,... >>>>> > >>>>> > [ 2935.309616] usb 1-2: Product: BeagleBoneBlack >>>>> > [ 2935.309617] usb 1-2: Manufacturer: Circuitco >>>>> > [ 2935.309618] usb 1-2: SerialNumber: 5315BBBK0EEE >>>>> > [ 2935.311093] usb-storage 1-2:1.4: USB Mass Storage device detected >>>>> > [ 2935.311147] scsi host5: usb-storage 1-2:1.4 >>>>> > [ 2935.332057] usbcore: registered new interface driver cdc_acm >>>>> > [ 2935.339583] usbcore: registered new interface driver cdc_ether >>>>> > [ 2935.341774] rndis_host 1-2:1.0 eth1: register 'rndis_host' at >>>>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9 >>>>> > [ 2935.341859] usbcore: registered new interface driver rndis_host >>>>> > [ 2935.344118] usbcore: registered new interface driver rndis_wlan >>>>> > [ 3005.699766] Modules linked in: rndis_wlan rndis_host cdc_ether >>>>> usbnet mii >>>>> > cdc_acm nls_iso8859_1 uas usb_storage xt_multiport iptable_filter >>>>> ip_tables >>>>> > x_tables pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) >>>>> vboxdrv(OE) >>>>> > pn544_mei mei_phy pn544 hci nfc dell_wmi sparse_keymap uvcvideo >>>>> > videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common >>>>> videodev media >>>>> > hid_logitech_hidpp snd_usb_audio snd_usbmidi_lib dell_laptop dcdbas >>>>> i8k >>>>> > dm_multipath scsi_dh intel_rapl iosf_mbi x86_pkg_temp_thermal >>>>> > intel_powerclamp coretemp kvm_intel arc4 kvm bnep snd_hda_codec_hdmi >>>>> > crct10dif_pclmul rfcomm crc32_pclmul ghash_clmulni_intel >>>>> > snd_hda_codec_realtek snd_hda_codec_generic snd_soc_rt5640 iwlmvm >>>>> bluetooth >>>>> > snd_soc_rl6231 mac80211 aesni_intel snd_soc_core aes_x86_64 lrw >>>>> gf128mul >>>>> > snd_compress glue_helper ablk_helper snd_pcm_dmaengine cryptd >>>>> snd_hda_intel >>>>> > snd_hda_controller snd_seq_midi snd_hda_codec snd_seq_midi_event >>>>> snd_hwdep >>>>> > snd_rawmidi iwlwifi snd_pcm joydev serio_raw cfg80211 lpc_ich shpchp >>>>> mei_me >>>>> > mei 8250_fintek dw_dmac dell_smo8800 dw_dmac_core snd_seq >>>>> snd_seq_device >>>>> > snd_soc_sst_acpi snd_timer snd i2c_hid 8250_dw spi_pxa2xx_platform >>>>> > i2c_designware_platform i2c_designware_core binfmt_misc dell_rbtn >>>>> mac_hid >>>>> > soundcore parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log >>>>> > hid_generic hid_logitech_dj usbhid hid i915 psmouse ahci i2c_algo_bit >>>>> > libahci sdhci_pci drm_kms_helper e1000e drm ptp pps_core wmi video >>>>> > sdhci_acpi sdhci >>>>> > [ 3361.518323] usb 1-2: USB disconnect, device number 5 >>>>> > [ 3361.518375] rndis_host 1-2:1.0 eth1: unregister 'rndis_host' >>>>> > usb-0000:00:14.0-2, RNDIS device >>>>> > [ 3395.707524] usb 1-2: new high-speed USB device number 6 using >>>>> xhci_hcd >>>>> > [ 3395.835858] usb 1-2: New USB device found, idVendor=1d6b, >>>>> idProduct=0104 >>>>> > [ 3395.835863] usb 1-2: New USB device strings: Mfr=3, Product=4, >>>>> > SerialNumber=5 >>>>> > [ 3395.835865] usb 1-2: Product: BeagleBoneBlack >>>>> > [ 3395.835867] usb 1-2: Manufacturer: Circuitco >>>>> > [ 3395.835869] usb 1-2: SerialNumber: 5315BBBK0EEE >>>>> > [ 3395.837660] rndis_host 1-2:1.0 eth1: register 'rndis_host' at >>>>> > usb-0000:00:14.0-2, RNDIS device, a0:f6:fd:4b:fd:c9 >>>>> > [ 3395.838325] usb-storage 1-2:1.4: USB Mass Storage device detected >>>>> > [ 3395.838386] scsi host6: usb-storage 1-2:1.4 >>>>> >>>>> It's coming thru.. >>>>> >>>>> what does: >>>>> >>>>> sudo dhclient eth1 >>>>> sudo ifconfig -a >>>>> >>>>> show? >>>>> >>>>> Regards, >>>>> >>>>> >>>>> -- >>>>> Robert Nelson >>>>> https://rcn-ee.com/ >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "BeagleBoard" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/beagleboard/cvW0j4knXe4/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/beagleboard/cvW0j4knXe4/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
