Ok here is what I have so far. I'm almost finished with the geodesic (I still want to "solvent weld" the joints though). Need to swap out the wire with picture-hanging wire and get the basswood "base board" to mount my electronics on. I'm going to do the motor mounts as aluminum plates that I'm going to Drexel fabricate. Looks like I'm going to have to go with the mast approach to get my mentioning right though it will make moving my boards around difficult.
<https://lh3.googleusercontent.com/-LS_hcrgQfUQ/WJrpMUBP3rI/AAAAAAAAAHA/WEm-ySNS_sUMcASEooiAO5bypdWoCUlNgCLcB/s1600/WIN_20170208_02_46_40_Pro.jpg> On Monday, January 30, 2017 at 6:19:30 PM UTC-7, woody stanford wrote: > I posted the remote control for this in Software, but I put a bunch of > hardware in it so I thought I'd post it here. > > > https://groups.google.com/forum/#!category-topic/beagleboard/software/evSIUcuWfUY > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/25e6a968-182f-41d7-9c1a-814fd8d67443%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
