Steven: Thanks for pointing out speedtest-cli.
I followed your tutorial and got my ETH-WIZ 10/100 Mbps Click running, since Robert released the overlay for that yesterday. The one addition to your tutorial is that it also required upgrading the kernel to 4.9 as part of the install, per Robert's instructions for the ETH-WIZ. As you say, it boots, and just works. Running speedtest-cli ... I get 3.3 Mbps down, and 4.6 Mbps up. Confirmed that the chip had negotiated a 100 Mbps connection, so not the connection. I note that, in reading the source for the '.dtbo', that the SPI clock is set to 12 MHZ. Recompiled the '.dtbo' with SPI clock at 24 MHz. Now, I get 3.8 Mbps down and 5.9 Mbps up, so the SPI transfer speed increase helps, but is not the bottleneck. My network measures 71 down and 5.9 Up, so at least, I can max out my network connection on the uplink. --- Graham == -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/246d4554-de97-42c9-8938-fbbc29b1e376%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
