Hello Grant and Vincent, I'm interested in passing SCT on my board with the latest U-Boot. Would you know which CONFIG options are required for the SCT? I guess some CONFIG_EFI* options are related, but some of them may not be needed. Is there any good documentation about configuring U-Boot?
Thank you, 2021年5月10日(月) 22:36 Grant Likely <grant.lik...@arm.com>: > > For the EBBR meeting today: > > Attached is the test result report from running a recent version of > U-Boot on an iMX8 platform and parsed with the SCT_Parser tool. > > g. > > > -------- Forwarded Message -------- > Subject: Re: EBBR Testing topic for today? > Date: Mon, 10 May 2021 14:22:56 +0100 > From: Vincent Stehle <vincent.ste...@arm.com> > To: Grant Likely <grant.lik...@arm.com> > > > > Hi Grant, > > Here are some more SCT results: a run from this morning on Compulab, > with latest firmware from Paul (+ 3 patches) and latest sct parser config. > > INFO main: 0 dropped(s), 0 failure(s), 66 ignored(s), 10753 pass(s), 60 > waived(s), 0 warning(s) > > (The attached summary excludes the pass.) > > Best regards, > Vincent. > > > > > _______________________________________________ > boot-architecture mailing list > boot-architecture@lists.linaro.org > https://lists.linaro.org/mailman/listinfo/boot-architecture -- Masami Hiramatsu _______________________________________________ boot-architecture mailing list boot-architecture@lists.linaro.org https://lists.linaro.org/mailman/listinfo/boot-architecture
