Hi Masami,

Here are the instructions that I've been working on:

https://github.com/ARM-software/ebbr/wiki/EBBR-Testing-Guide
https://github.com/ARM-software/ebbr/wiki/U-Boot-Configuration-Guide

I hope that helps

g.

On 12/05/2021 02:02, Masami Hiramatsu wrote:
Hello Grant and Vincent,

I'm interested in passing SCT on my board with the latest U-Boot.
Would you know which CONFIG options are required for the SCT?
I guess some CONFIG_EFI* options are related, but some of them may not
be needed.
Is there any good documentation about configuring U-Boot?

Thank you,

2021年5月10日(月) 22:36 Grant Likely <grant.lik...@arm.com>:

For the EBBR meeting today:

Attached is the test result report from running a recent version of
U-Boot on an iMX8 platform and parsed with the SCT_Parser tool.

g.


-------- Forwarded Message --------
Subject:        Re: EBBR Testing topic for today?
Date:   Mon, 10 May 2021 14:22:56 +0100
From:   Vincent Stehle <vincent.ste...@arm.com>
To:     Grant Likely <grant.lik...@arm.com>



Hi Grant,

Here are some more SCT results: a run from this morning on Compulab,
with latest firmware from Paul (+ 3 patches) and latest sct parser config.

INFO main: 0 dropped(s), 0 failure(s), 66 ignored(s), 10753 pass(s), 60
waived(s), 0 warning(s)

(The attached summary excludes the pass.)

Best regards,
Vincent.




_______________________________________________
boot-architecture mailing list
boot-architecture@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/boot-architecture




_______________________________________________
boot-architecture mailing list
boot-architecture@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/boot-architecture

Reply via email to