Hi Grant,

Thanks, this is what I need. I'll check them out!

2021年5月12日(水) 18:56 Grant Likely <grant.lik...@arm.com>:
>
> Hi Masami,
>
> Here are the instructions that I've been working on:
>
> https://github.com/ARM-software/ebbr/wiki/EBBR-Testing-Guide
> https://github.com/ARM-software/ebbr/wiki/U-Boot-Configuration-Guide
>
> I hope that helps
>
> g.
>
> On 12/05/2021 02:02, Masami Hiramatsu wrote:
> > Hello Grant and Vincent,
> >
> > I'm interested in passing SCT on my board with the latest U-Boot.
> > Would you know which CONFIG options are required for the SCT?
> > I guess some CONFIG_EFI* options are related, but some of them may not
> > be needed.
> > Is there any good documentation about configuring U-Boot?
> >
> > Thank you,
> >
> > 2021年5月10日(月) 22:36 Grant Likely <grant.lik...@arm.com>:
> >>
> >> For the EBBR meeting today:
> >>
> >> Attached is the test result report from running a recent version of
> >> U-Boot on an iMX8 platform and parsed with the SCT_Parser tool.
> >>
> >> g.
> >>
> >>
> >> -------- Forwarded Message --------
> >> Subject:        Re: EBBR Testing topic for today?
> >> Date:   Mon, 10 May 2021 14:22:56 +0100
> >> From:   Vincent Stehle <vincent.ste...@arm.com>
> >> To:     Grant Likely <grant.lik...@arm.com>
> >>
> >>
> >>
> >> Hi Grant,
> >>
> >> Here are some more SCT results: a run from this morning on Compulab,
> >> with latest firmware from Paul (+ 3 patches) and latest sct parser config.
> >>
> >> INFO main: 0 dropped(s), 0 failure(s), 66 ignored(s), 10753 pass(s), 60
> >> waived(s), 0 warning(s)
> >>
> >> (The attached summary excludes the pass.)
> >>
> >> Best regards,
> >> Vincent.
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> boot-architecture mailing list
> >> boot-architecture@lists.linaro.org
> >> https://lists.linaro.org/mailman/listinfo/boot-architecture
> >
> >
> >
>


-- 
Masami Hiramatsu
_______________________________________________
boot-architecture mailing list
boot-architecture@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/boot-architecture

Reply via email to