Hi Denise, I didn't see your previous post, but maybe I just missed it.
If you have a home network set up already you do need to set up a wireless connection using the braillenote. The best way to do this is to inser the wireless card, go into the options menu, then the connectivity menu, and finally into wireless. The bn says something like activeed no, so key in y to activate the card. You will almost immediately see the wireless menu. Go to scan for networks and hit enter. After a few seconds you should get a list of the networks found which probably will only consist of your own home network. Press enter and at the prompt give the configuration a name meaningful to you. Probably all the other settings can be accepted at their default values unless you happen to have wep enabled. If you do, you will need to change the "wep no" prompt to "yes and then you'll be asked for the wep key which must be entered exactly as it is on your router. If you don't have wep enabled, then just leave that setting at "no". Finally, save the configuration which has just been created. When you go back into the wireless menu again you will see "connect using existing configurations" or something very similar. Press enter on that and you should connect. When you do email or access the web on the bn, you will be asked which connection you want to use, so if you want to use your wireless connection, just select that one. If it's the only one or if you only use that one, it will be selected by default so all you have to do is hit enter. I hope this answers your question. If not, try again. <smile> Don
